How to ignite a gas stove?

With the rapid development of the times, the technical level of gas appliance is also advancing with the times. The history of using naked flame to ignite the burner (the earliest liquefied petroleum gas cooker) has passed, and the current gas stoves mainly use piezoelectric ignition and pulse ignition.

Most desktop cookers sold in the market will adopt a simple piezoelectric ignition method, similar to piezoelectric lighters. By pressing the knob switch of the rice cooker to ignite the flame of the stove, it has the advantages of low cost and no need to install a separate battery; Disadvantages are: the success rate of ignition is not very high, and it is easy to deflagrate when continuous points are not on fire.

The ignition mode of the embedded cooker is pulse ignition. A pulse igniter is installed inside the cooker, and one or two batteries 1 are required to supply power to the pulse igniter. Its advantages are high ignition success rate and convenient use; Disadvantages: it is necessary to install another 1 battery for power supply, and replacing and purchasing the battery is also a cost.

Comparing the two ignition methods, for safety reasons, manufacturers usually use pulse ignition to avoid the explosion of stove ignition to the maximum extent.

It should be noted that even if pulse ignition is carried out several times continuously, the cooker will deflagrate, but the success rate of pulse ignition is higher than that of piezoelectric ignition, and the probability of deflagration will be smaller than that of piezoelectric ignition, which we should clearly realize.

Tip: Don't continue to light the cooking stove without lighting it twice in a row, because every time it is lit, a certain amount of gas will be released. If it is not ignited for many times, it will deflagrate once in the future. If the stove doesn't catch fire, check it first to see if it is caused by the arrears of the gas meter at home and the lack of battery power in the stove. If it is not the problem mentioned above, it is necessary to contact the personnel of the gas company in time for on-site treatment. If it is judged that the cooker is faulty, it is necessary to contact the cooker manufacturer for on-site maintenance.

Use gas safely, warm you and me, and gain more knowledge about gas. Please pay attention to the official account of WeChat "Tan Shao Tang".