Build a home for the birds production method

Build a home for the birds production methods are as follows:

Method 1:

1, the preparation of tools and materials, including waste cardboard boxes, pens, rulers, carving knives, scissors, glue, tape, kraft paper, rivets, plastic wrap and so on.

2, how to make a cardboard birdhouse? First of all, draw a simple birdhouse drawing, if you do not know how to draw, you can find the relevant drawings from the Internet.

3, in accordance with the drawings of the look, in the cardboard box to draw the various parts of the bird's nest needed, we can follow the size of the cardboard box to determine the size of the bird's nest.

4, with a carving knife, cut off the unwanted parts. At the same time will need to fold the edge to be left out, remember to use the knife to fold the edge of the line along the fold a little, when it will be good to fold some.

5, carton birdhouse practice is what? Carton cut, the various parts, riveted with rivets, can also be glued together, to confirm firm, in the cover of the roof, and fixed with rivets or glue.

6, with plastic wrap will be outside the entire birdhouse wrapped layer, so as to prevent the birdhouse leakage when it rains. Then wrap a layer of kraft paper, which can prevent birds from destroying the cling film, but also to prevent the cling film reflective, so a cardboard birdhouse is made.

Method 2:

1, what is the weaving method of newspaper bird's nest / a newspaper horizontally divided into 4, from one side diagonally rolled up, pay attention to adjust to maintain an even thickness. The closing should be glued firmly. Make N paper rolls in this way to start the preparation.

2, in the 7 branches of the paper rolls into the wire, one of which wear half a wire can be, cross positioning, from half a wire of the paper rolls to start winding.

3, 4 weeks after braiding, the rest of the paper rolls evenly separated, at this time **** there are 13 main branches. Then use the other paper rolls up and down alternately around the braid, when the bottom diameter of the container is completed can be put up the main branch.

4, according to their own preferences, the main branch adjusted shape, cut off the excess main branch. Pay attention to the braiding, but also often adjust the shape, otherwise it is crooked. Finally, the remaining main branch inside and outside of the clamping edges, newspaper bird's nest is completed.