Installation method of water dispenser with cleaning bucket

Clean bucket drinking machine is a common drinking machine. The clean bucket is used as the source water, which is filtered by the water purifier and supplied to users for drinking. Although the installation of this kind of drinking machine is relatively simple, it requires high details. The following is the installation method of the clean bucket drinking machine:

1. Choose a water source and location: First, you need to choose a stable water source, such as a tap water pipe or a self-contained bucket. At the same time, choose a stable place to install, to ensure that it is not easy to dump when using.

2. Assemble the bucket-cleaning drinking machine: assemble the bucket-cleaning drinking machine, including the heater, refrigerator, water tank and other components, and connect the components according to the instructions.

3. Installation of water purifier: Install the water purifier according to the instructions and connect it to the water inlet of the drinking machine with a clean bucket. It should be noted that the filter element of the water purifier needs to be replaced regularly, and it should be easy to replace when installing.

4. Turn on the power: plug in the power cord of the clean bucket drinking machine and adjust the switches of the heater and refrigerator to ensure normal work.

5. Trial operation: After the installation is completed, the water dispenser with clean bucket needs to be put into trial operation. First put the water in the clean bucket into the water tank, then turn on the water dispenser and drain the pipeline, and the water dispenser can be used normally.

In short, pay attention to the details and follow the instructions. When using, the filter element should be cleaned and replaced regularly to ensure the hygiene and quality of drinking water.