Origami method of airplane

Here’s how to make an airplane origami:

1. Method 1

1, rectangular paper, fold the two long sides in half and then unfold.

2. Fold the lower two corners in half along the middle edge, and then fold the two corners upward. At this time, the paper becomes a rectangle.

3. Compare the two lower corners to the middle line and fold them up respectively. Pay attention to symmetry on both sides.

4. Fold the small corner in the middle of the paper upward, and fold the paper downward in half.

5. Fold the lower edge upward, and do the same for the next side.

6. After folding, open the paper and the airplane is ready.

2. Method 2

1, square paper, fold out the traces of "x and +".

2. Fold one corner diagonally, making sure to only fold half of the crease and restore it after folding.

3. Then on this side, fold the other corner diagonally, and only fold half of the crease before restoring it. Do the same for the other three corners.

4. After folding, turn the paper over and fold the paper downward and inward as shown by the red line "+" in the picture. Fold the four sides according to the creases in steps 2 and 3.

5. Turn the first side up, and then fold the two separate sides at the bottom to the left and right.

6. Fold the paper in half to the right, rotate the paper 90 degrees counterclockwise, and then fold one side upward.

7. The edge on the back is the same. The folded effect is as shown in the picture. Then cut the right corner along the middle. The red line in the picture is marked.

8. Fold both sides of the cut corner upwards and then downwards.

9. Adjust the lower corners of the paper and the airplane is ready.