Bookshelf making tutorial

1. Manufacturing materials: three boards (2700* 120* 18), two or three pieces of cardboard (plywood) with the same specifications, three extra-long screws with spirals, paint and varnish.

Production tools: vertical shovel, drilling machine.

Third, the production steps: vertical panel frame production?

First, cut out the shape of the board, vertical and horizontal lines. The three vertical plates must be the same size. Shelves can be placed at will. Regardless of the size, the big one can hold two thick classical masterpieces and photo albums. These just need to change the length and width. The trick is to cut a beautiful arc. The transverse plate is basically straight, but it is cut into an arc 40 cm from the end.

Step 2: A complicated step in the whole cutting and scribing process is to successfully saw out the notch where the horizontal frame and the vertical frame fit. Each transverse plate is cut with three notches, one notch and two notches are 20 cm away from both ends. The notch on the vertical plate is cut according to your own needs, because it directly determines the small grid. Adjust the position of the incision according to the size of the book.