Lego blowback belt gun tutorial

The LEGO blowback belt gun tutorial is as follows:

1. A 15-hole flat beam, a large curved beam, and four black pins make up the state shown. Add a 24 gear to the four black pins for fastening. In addition, in front of the finished beam with a long pin to fix two 13-hole flat beam, with a long pin and a big head pin a 3-hole flat beam fixed on the third hole of the flat beam.

2, in the other side of the fifth hole also fixed long pin big head pin, etc., in the 15-hole flat beam on both sides of the big head pin. Take a 9-hole flat beam, hole up, put it into the slot, and put a big head pin on the last hole.

3, set the leather band, put the leather band on both sides of the big head pin and then put the leather band on the big head pin of the 9-hole flat beam, the small pistol is made. Pull the big head pin, you can shoot the gun.

The Lego gun is a toy gun that is mainly powered by the familiar rubber bandsUnlike a slingshot, the rubber bands in a leather band gun not only power the gun body, but also act as bullets for the gun to be fired.

The flexibility of the rubber bands, as well as the limited degree of elasticity of the rubber band gun bullets to control the right degree of "power". This makes the gun one of the toys that parents can feel more comfortable with than ordinary slingshots or replica guns, which have been the cause of many tragedies.

The Lego gun, which can be formed into a pellet gun by making the area where he hangs the pellet rotate and form a semi-automatic mode. If he wants to have a back sugar function, the longer the barrel the longer the range, there is also a kind of can be car hair ribbons gun.