What is the manufacturing method of woodworking table saw push table? Handmade is simple and practical, and you can learn it in 5 minutes.

For interior decoration, woodworking decoration is a common process. For carpenters, table saws are generally used in the process of work. For the production of woodworking table saw and push table saw, we should know the specific methods, so as to ensure the normal construction. What is the manufacturing method of woodworking table saw push table? Handmade is simple and practical, and you can learn it in 5 minutes. Here is a detailed introduction to the relevant knowledge for everyone.

1. What is the manufacturing method of woodworking table saw push table?

Tools/raw materials:

A 555 motor (545 is also acceptable)

Two 2mm*24mm* 12mm aluminum plates.

Two 2mm*24mm* 12mm aluminum plates and M3 hexagonal copper columns (8 in 55mm8 and 4 in 30mm4).

M3 countersunk head screw

Washer number

A ship switch

A set of power interface, 3 wires, 0.44mm drill chuck, connecting copper sleeve, 60mm grinding wheel and connecting rod.

Methods/Steps: First of all, you must have the motor saw blade of Taiwan Opera. These things are common and can be obtained. Then the main problem is pushing the table. This is difficult to solve. You can find some inspiration from Odendo's first table saw, because after all, it was the founder of the table saw, and the design process at that time was relatively simple. The first table saw was produced by 1906. I was lucky enough to see it. I think you should be inspired after reading it.

2. What is the main structure of the table saw?

The main machine part of the table saw includes a lathe bed, a workbench, longitudinal and transverse guide plates, a main saw, a scoring saw and a transmission device. The structure and working principle are similar to those of a common circular saw, and it can be used as a common circular saw alone.

Composition of table saw:

1. Rack; 2. Main saw part; 3. Slot saw part; 4. Transverse guide baffle; 5. Fix the workbench; 6. Sliding push table; 7. Diagonal saw guide plate; 8. brackets; 9. Diagonal saw angle display device; 10. Transverse guide baffle.

The main structural feature of the table saw is the use of two saw blades, namely the main saw blade and the scribing saw blade. When cutting, the scribe saw saws ahead of time. First, a groove with a depth of 12mm and a width of 0. 10.2mm thicker than that of the main saw blade is sawed on the bottom surface of the processed plate, so as to ensure that the kerf edge will not tear when the main saw blade cuts, thus obtaining good sawing quality. The scribing saw blade has a small diameter, usually about 120mm, and is driven by a separate motor. The rotating speed of the saw blade is generally above 9000r/min, and the cutting speed is generally 5660 m/s, which requires the scribing saw blade and the main saw blade to be aligned on the same vertical plane. Diameter of main saw blade 8943; Generally 300400mm, driven by main motor through V belt. According to the diameter of the main saw blade and the material type of the processed plate, the main saw blade can use the tower wheel to change speed. The tower wheel is simple in structure and belongs to constant power output, which is more in line with the actual needs of wood processing. The main motor power is generally 49kw. In order to make the speed regulation simple, a special V-belt is adopted to ensure that a single belt can meet the required power transmission. The rotating speed of the main saw blade is generally 30,006,000 rpm, and the distance between the main saw blade and the scribing saw blade is generally about100 mm. ..

Another main structural feature of the table saw is that the scribing saw blade and the main saw blade are fixed, and the movable table made of aluminum profiles with processed plates is pushed back and forth by hand to realize sawing. Due to the special structure of the guide rail piece J of the moving table, manual pushing and feeding is light and labor-saving, and the machining accuracy is very high.

Most of the lathe beds of table saws are made of welded steel plates with a thickness of 56mm, which are stable and beautiful, and can ensure that the early sawn trees will not be tilted and twisted. The fixed workbench is fixed on the top of the lathe bed, and the castings are made in Sichuan, which requires straightness and no deformation, and are equipped with longitudinal cutting guide plate and its adjusting mechanism.

Third, the use and operation characteristics of table saw

Precision cutting saws are all dynamically or statically balanced, generally without foundation, and can be added to the flat ground. During machining operation, the workpiece is placed on the movable workbench, and the movable workbench is manually pushed to feed the workpiece. The operation is very convenient. Always pay attention to safety when using flexibly to prevent accidents.

The specifications of table saws have become a series, the main parameter is the maximum sawing length, and the general range is 20005000ram. China industry standard JB/T9950 1999 "Parameters of Woodworking Saw with Mobile Table" stipulates that T3 specifications are 2000mm, 2500mm and 3 150 mm.

Since the early 1980s, China has introduced, investigated and produced table saws. More than 20 woodworking machinery manufacturers have produced table saws with an annual output of about 4,000 sets, which basically replaced imported products and met domestic demand.

Attention should be paid to some details in woodworking decoration, and the decoration design should be carried out according to the owner's demand and decoration style, especially for the operation of table saw pushing table, so as to ensure the concrete quality and effect of construction, improve the interior decoration style, and provide a better living environment for the owner and improve the quality of life.