Shandong Province Arts and Crafts Association of Shandong Province Arts and Crafts Association Charter

Article 1 The full name of this Association is "Arts and Crafts Association of Shandong Province" (hereinafter referred to as "the Association"), the English name "Arts Association of ShanDong" abbreviation. "Abbreviation for AASD.

Second The Association is the province's arts and crafts industry enterprises, institutions as the main body, voluntarily composed of cross-region, cross-ownership of the province's social organizations, social groups, legal persons.

Article 3 The purpose of the Association is to adhere to the basic line of the Party, to adapt to the socialist market economic system and the requirements of modernization, to play the role of bridge and link between the government and enterprises, and zealously serve the enterprises and industries, and strive to improve the scientific and technological level of the arts and crafts industry and the level of economic management, to promote the development of the arts and crafts industry, and the prosperity of the province's arts and crafts business.

Article IV The Association's business department for the Shandong Province Light Industry Collective Enterprises Association, in the provincial Civil Affairs Department approved registration. The Association accepts the business department in charge of the business guidance and supervision and management of the association registration authority.

Article 5 The Association's residence is located in Jinan City, Shandong Province, No. 92 Heroes Hill Road. Article 6 The business scope of the Association is:

(1) to carry out investigations on the basic situation of the industry, and put forward to government departments to formulate industry planning, economic legislation, economic and technological policies and other aspects of the proposal. Assist in the development of industry standards, industry testing, standards, information and other work involved in business guidance.

(2) to promote the industry's scientific research, technological transformation and new product development. In the industry to promote total quality management, product quality testing of the industry. Identification of arts and crafts treasures, certification and quality supervision of important products, and participate in business guidance. Issuing production licenses and export product quality licenses.

(3) organizing industry economic and technical exchanges, personnel training, international cooperation and the industry's personnel to study abroad. Organize domestic and foreign product exhibitions and fairs, for enterprises to expand domestic and foreign markets, improve economic efficiency services.

(4) To make suggestions on the adjustment of the industry's product structure and enterprise structure, the construction of raw material bases, the formulation of investment guides and scientific and technological development guides, and to participate in the evaluation and consultation of major infrastructure and technological reform projects for the development of the industry.

(v) Participate in professional conferences and related activities both within and outside the province and internationally, and organize member units to agree on the rules and regulations of the industry, and be responsible for supervising the implementation. Promote various forms of liaison and alliance within and outside the industry, and coordinate economic activities such as production and operation, technical cooperation within and between industries.

(F) to carry out consulting services, publish journals, collect and analyze economic and technical information of the industry at home and abroad, to carry out market forecasting, reflecting the important situation of the industry in a timely manner, and put forward proposals for solving the industry **** problems.

(VII) to promote the industry's income and expenditure and environmental protection and energy conservation work, the development of arts and crafts industry public welfare undertakings. Mediate member disputes, coordinate industry relations, and safeguard the legitimate rights and interests of member units.

(viii) lead the organization of traditional arts and crafts in Shandong Province, the assessment and identification of products and management work, the design of the validation system, the issuance of traditional arts and crafts and arts and crafts celebrities certificate mark, seal.

(ix) to undertake government departments and the Federation of Light Industry Collective Enterprises of Shandong Province and other related matters entrusted by the relevant social organizations. Article VII of the Association members have group members, individual members and honorary members.

Where engaged in arts and crafts production, sales, legal person qualification in accordance with the law of enterprises and scientific research, design, education, schools and other relevant units or related social organizations, recognizes the Articles of Association, may apply for membership as a group member.

The entrepreneurs and arts and crafts experts and technicians who have made contributions to the development of arts and crafts in our province can apply in writing and be approved by the Association to become individual members.

Any experts and scholars, social celebrities and overseas Chinese who are keen to help the development of arts and crafts in our province can be hired by the Association as honorary members.

Article VIII Members applying for membership in the Association must have the following conditions:

(1) uphold the Association's constitution;

(2) have the will to join the Association;

(3) have a certain degree of influence in the Association's field of business (industry, discipline).

Article 9 The procedures for membership are:

(1) Submission of an application for membership;

(2) Discussion and approval by the Board of Directors;

(3) Issuance of a membership card by the Board of Directors or a body authorized by the Board of Directors.

Article X. Members shall enjoy the following rights:

(1) the right to elect, be elected and vote in the Association;

(2) to participate in the activities organized by the Association;

(3) to have priority in enjoying the relevant journals and materials published by the Association as well as the services provided;

(4) to reflect the relevant situation to the Association and to provide information on production, technology, enterprise management and other information and management experience.

Article 11 Members shall fulfill the following obligations:

(1) to abide by the Articles of Association and implement the resolutions of the Association;

(2) to safeguard the lawful rights and interests of the Association;

(3) to actively participate in the business activities organized by the Association and to complete the tasks entrusted to them by the Association;

(4) to reflect the relevant situations to the Association and to provide information on production, technology, enterprise management and other aspects;

(4) to reflect the relevant situations to the Association and to provide information on production, technology, enterprise management and other aspects and experience in management, technology, enterprise management and other information and business management experience;

(e) technical provisions of the payment of dues.

Article XII Application for membership or withdrawal shall be made in accordance with the regulations of the Association.

Article XIII of the members of the Association in violation of the Articles of Association, do not fulfill their obligations, after criticizing the ineffective, by the Board of Directors or the Executive Council voted to be removed. Article XIV of the Association's supreme authority is the General Assembly (or Member Representative Assembly). The duties of the general meeting (or members' representative assembly) are:

(1) to formulate and amend the bylaws;

(2) to elect and dismiss the directors;

(3) to consider the work report of the board of directors and the financial report;

(4) to decide on termination matters.

Article 15 The General Meeting of Members (or the General Meeting of Members' Representatives) shall be effective only if more than two-thirds of the members (or the representatives of members) are present.

Article 16 The general meeting of the members shall be attended by representatives of the members, honorary members, and comrades appointed to honorary positions and advisors. The congress is convened once every four years, due to special circumstances need to advance or postpone the renewal, shall be voted by the council, reported to the higher unit in charge of reviewing the well after the approval of the registration authority of the association agreed. But the extension of the longest not more than one year.

Article 17 The Council is the executive body of the General Assembly (or the General Assembly), leading the Association to carry out its daily work between sessions, and is responsible to the General Assembly (or the General Assembly).

Article 18 The duties of the Board of Directors are:

(1) to implement the resolutions of the General Meeting (or the General Meeting of Representatives);

(2) to elect and dismiss the chairman, vice-chairman, and secretary-general;

(3) to report to the General Meeting (or the General Meeting of Representatives) on its work and financial situation;

(4) to prepare for the holding of the General Meeting (or the General Meeting of Representatives);

(5) to convene a general meeting (or the General Meeting of Representatives);

(6) to hold a general meeting (or the General Meeting of Representatives); and

(7) to hold an executive committee. General Meeting of Members);

(v) deciding on the absorption or removal of members;

(vi) deciding on the establishment of offices, branches, representative bodies and entities;

(vii) deciding on the appointment of the Deputy Secretary General and the main heads of the bodies;

(viii) leading the bodies of the Association to carry out their work;

(ix) formulating the internal management system.

Article 19 The Board of Directors shall require more than two-thirds of the votes to be effective.

Article 20 The Council shall meet at least once a year, or by correspondence in special circumstances.

Article 21 The Association shall establish a Standing Council (if the number of the Council is large, there may be a Standing Council). Standing Council elected by the Board of Directors, in the inter-sessional period between the Board of Directors to exercise the powers and functions of Article 18, paragraph 1, 3, 5, 6, 7, 8, 9, responsible to the Board of Directors (the number of executive director does not exceed one-third of the number of directors).

Article 22 The Standing Council shall be convened with the attendance of more than two-thirds of the executive members, and its resolutions shall be effective only after the vote of more than two-thirds of the executive members present.

Article 23 The Standing Council shall be convened at least once every six months, and in special cases, it can also be convened by correspondence.

Article 24 The chairman, vice-chairman and secretary-general of the Association must have the following conditions:

(1) adherence to the basic line of the Party, guidelines, policies, and good political quality;

(2) have a greater impact in the business field of the Association;

(3) chairman, vice-chairman and secretary-general of the Association is full-time;

(4) (d) they are in good health and can insist on normal work;

(e) they have not been subjected to criminal punishment of deprivation of political rights;

(f) they have full capacity for civil behavior;

Article 25 If the chairman, vice-chairman, or secretary-general of the Association exceeds the maximum age of office, they shall be voted by the Board of Governors, and shall be reported to the business administration unit for examination and approved by the association registration authority before they can assume the office. They may hold office only after they have given their consent.

Article 26 The chairman, vice-chairman and secretary-general of the Association shall hold office for a maximum of two terms. If the term of office needs to be extended due to special circumstances, it shall be voted by more than two thirds of the members (or member representatives) of the general meeting (or member representative meeting), and reported to the business unit in charge for examination and approval by the administrative organ of the registration of associations before taking up the post.

Article 27 The chairman of the Association shall be the legal representative of the Association. The legal representative of the Association does not concurrently serve as the legal representative of other social organizations.

Article 28 The chairman of the Association shall exercise the following powers and functions:

(1) to convene and preside over the Council (or the Executive Council);

(2) to check the implementation of the resolutions of the General Meeting of the members (or the General Meeting of the members' representatives) of the Council (or the Executive Council);

(3) to sign relevant important documents on behalf of the Association.

Article 29 The secretary-general of the Association exercises the following powers and functions;

(1) to preside over the offices to carry out the daily work and organize the implementation of the annual work plan;

(2) to coordinate the work of the various branches, representative offices and entities;

(3) to nominate candidates for the deputy secretary-general as well as the principal persons in charge of the offices, branches, representative offices and entities to be submitted to the Council or the executive committee. (c) Nominate candidates for deputy secretaries-general and full-time staff of offices, branches, representative organizations and entities for decision by the Council or the Standing Council:

(d) Decide on the employment of full-time staff of offices, representative organizations and entities. Article 30 In view of the characteristics of the arts and crafts industry, which is characterized by a large number of industries and a wide range of distribution, professional committees may be set up according to the needs of production development. The establishment and abolition of professional committees shall be decided by the Council.

Article 31 The local associations set up by the cities themselves may participate in the Association as group members. Article 32 The Association shall be financed by:

(1) dues paid by members;

(2) donations from all sectors of the society;

(3) governmental subsidies;

(4) revenues from the activities or services carried out within the approved scope of business.

Article 33 The Association collects membership fees in accordance with relevant state regulations.

Article 34 The funds of the Association must be used for the business scope and career development as stipulated in the Articles of Association, and may not be distributed among the members.

Article 35 The Association establishes a strict financial management system to ensure that the accounting information is legal, true, accurate and complete.

Article 36 The Association is equipped with accountants with professional qualifications. The accountant shall not act as cashier at the same time. Accounting personnel must carry out accounting, accounting supervision. When accounting personnel transfer their jobs or leave their jobs, they must clear the handover procedures with the receiver.

Article 37 The Association's asset management must implement the financial management system prescribed by the state, and accept the General Assembly (or the General Assembly) and the supervision of the financial sector. The source of assets belonging to the state appropriations or social donations, subsidies must accept the supervision of the audit organs, well will be the relevant information in an appropriate manner to the community.

Article 38 The Association must accept the financial audit organized by the registration authority of the association and the business unit before the change of term or change the legal representative.

Article 39 The assets of the Association shall not be appropriated, privatized or misappropriated by any unit or individual.

Article 40 The salaries, insurance and welfare of the full-time staff of the Association shall be implemented with reference to the relevant provisions of the state for institutions. Article 40- Amendments to the Articles of Association shall be reported to the general meeting (or the general meeting of members) for consideration after being voted on and approved by the Board of Directors.

Article 42 The revised constitution of the Association shall be examined and approved by the business administration unit within 15 days after it is passed by the general meeting (or the general meeting of the members' representatives) and reported to the registration authority of the association for approval before it comes into effect. Article 43 If the Association completes its purpose or dissolves itself or needs to be canceled due to separation or merger, the Board of Directors or the Standing Committee shall propose a motion of termination.

Article 44 The motion of termination of the Association shall be voted by the general meeting of the members (or the general meeting of the members' representatives) and reported to the business administration unit for examination and approval.

Article 45 Before the termination of the Association, a liquidation organization shall be set up under the guidance of the business supervisory unit and the relevant authorities to liquidate the debts and debts and deal with the aftermath. During the liquidation period, no activities other than liquidation shall be carried out.

Article 46 The Association shall be terminated after the cancellation of registration procedures by the administrative organs of association registration.

Article 47 The remaining property of the Association after the termination shall be used for the development of undertakings related to the purposes of the Association in accordance with the relevant provisions of the state under the supervision of the business supervisory unit and the administrative organ for registration of associations. Article 48 The Articles of Association were adopted by the members on January 31, 2003 by correspondence vote.

Article 49 The interpretation of these Articles of Association shall be vested in the Board of Directors of the Association.

Article 50 The present constitution shall come into effect on the date of approval by the organization's registration authority.

January 16, 2003