Video explanation of traditional big factory exam

The test requirements of subject 2 S bend are: driving a vehicle from one end of the bend and driving it out from the other end. When driving, the steering speed is stable, no parking is allowed, and the wheels are not allowed to touch the lane sideline.

Subject 2: S-bend skills

1. When prompted by the car voice system, drive the car into the entrance of the bend, position the car in the middle of the road, and make the outer wheel of the car drive as close as possible to the right line of the bend.

2. Turn the steering wheel to the left when the hood coincides with the right sideline after entering the corner;

3. move on. When the left front and right lines overlap, turn the steering wheel to the left for half a turn while keeping the front side lines overlap;

4. When preparing to turn right, when the left front is aligned with the left line, return to the positive direction;

5. move on. When 1/3 on the right side of the hood is aligned with the sideline, turn the steering wheel to the right;

6. When the right front and left lines overlap, turn the steering wheel half a turn to the right to keep the front and left lines overlap, so that the car will not press the line.

Simply put, drive on the right in the left corner, and drive on the right line in the front corner of the car; When turning a corner, return to the positive direction first, press the left line with the right front corner, and then return to the positive direction after waiting for the car to drive out of the corner.

Can I scan the S-bend?

According to the relevant regulations, when conducting the S-bend test, both the front and the body can be scanned, and as long as the wheel does not roll over the road edge line, it will not be deducted.

The stupidest detour video in the second section, and the video explanation of detour skills in the second subject.