What does r47 stand for in the embedded opening size of Vantage gas stove?

R47 represents the radius of four fillets.

1, the size of the hole of the gas cooker is the size of the hole dug when the cooker is installed, which is smaller than the overall size and is the size of the cooker body.

2. The hole to be opened needs to ensure that the cooker can be embedded in it. Neither too small nor too big. If it is too large, the panel will be damaged by direct stress.

Usually there are templates for digging holes, and digging holes according to the above dimensions is almost the same. Never mind, just prescribe the medicine directly, it's in anyway. Moreover, the panel is larger than the opening, and the opening is naturally covered.

Extended data:

General dimensions and opening dimensions of gas stoves.

1. Excavation size: 680*350mm, overall size: 748 * 405 * 148 mm.

2. Excavation size: 708×388 R80mm, total size: 760×460×80mm.

3. Excavation size: 674*355mm, overall size: 740*430* 140m.

4. Excavation size: 635×350 mm, total size: 720× 400 mm. ..

5. Excavation size: 645×340×R30mm, total size: 7 10×400× 165mm.

6. Excavation size: 635×350mm, total size: 720×400× 125mm.

7. The inner diameter of the gas hose for gas stoves and gas water heaters is generally 9.5. If the gas hose is to pass through a table (usually marble or artificial marble) or a large cabinet, the opening is generally 20-25 mm; In addition, the user's opening surface with gas bellows is generally 25-30 mm