What are the construction techniques of wall plastering?

General wall plastering construction techniques are: 1. First repair the water and electricity notches on the wall, reserve holes, distribution boxes, etc. 2, basic level processing, remove surface impurities, such as tongue ash, residual mortar, dust, etc. , and keep it clean and flat; 3. Wet the base, then spray concrete and maintain it; 4. Paste the steel wire mesh to increase the external angle; 5, play delimit grey layer control line; 6, door and window corner protection plaster; 7, according to the standard paste ash cake; 8, repair the reserved hole, distribution box, water and electricity tank, box; 9, plaster layer ash, and do a good job of cleaning and maintenance.

Matters needing attention in wall plastering construction

1. First, apply a thin layer of ash as an attachment layer with a thickness of 2 to 5 mm, and compact the mortar to completely fill the gap.

2. Leveling in layers and batches, with the thickness of each layer being 7 ~ 9mm, leveling and screed.

3. Check the smoothness of bottom ash to ensure that the angles of Yin and Yang are square, the pipes are crowded together, and the walls and roofs are smooth. In addition, check whether the verticality and flatness of the wall meet the requirements.

4. After the completion of wall plastering, clear the ground mortar in time.