How does Dongfeng Capote sprinkler pump water?

First, the Dongfeng sprinkler should be parked as close as possible to the water absorption point.

2. Open the side door of the hose box, and take out the suction hose to make it swing backwards without bending.

Thirdly, connect one end of the suction hose to the four-way valve and pull the other end into the water as deep as possible to ensure that the pipe end is always 300mm below the liquid level during operation. Sprinkler price

4. Push the handle of the four-way valve to the direction parallel to the pipeline in the cab of Dongfeng sprinkler (each manufacturer has different installation directions, please remember that the four-way valve is closed). Sprinkler price

5. Put the transmission of the green sprinkler into neutral, then start the engine, disengage the clutch, and pull back the power take-off switch, that is, put it in gear to take power, and the water pump starts to run. Sprinkler price

6. The operator of Dongfeng sprinkler can observe the water level through the observation mirror at the upper part of the rear car. When the water tank is full of water, turn off the power take-off, and at the same time, quickly unplug the suction hose from the water surface or close the four-way valve. Sprinkler price

7. Put away the hose, put it back in the hose box and close the side door. Sprinkler price