How to print with a printer

Step 1: Connect the printer to the host computer, check whether the data cable and power cable are connected properly, if not, reconnect it, and then turn on the printer.

Step 2, put the paper into the paper box, and put in ordinary paper or photo paper.

Step 3: After loading the paper, load the original according to the instructions of the paper feeder until the printer shows the paper, and you can place the surface to be printed according to different models.

Step 4: Press the black-and-white copy or color copy button after placing.

The laser printer should pay attention to the following points in use:

1, the printer shell must have a good grounding conductor. Otherwise, the static electricity generated by the printer will make the performance of the machine unstable, affect the quality of samples, and seriously damage the machine and hurt people. ?

2. There is a lot of high pressure and high temperature in the printer, so you can't just open the shell.

3. The machine has high power and high frequency of temperature controlled silicon controlled rectifier. It is best to use a regulated power supply alone. ?

4. When a paper jam occurs during use. Be sure to locate the paper jam first, and then take it out gently and skillfully. Otherwise, related parts will be damaged or paper scraps will be left in the machine, which will affect the sample quality. ?

5, printing paper, the minimum is not less than 52g//m2, the maximum is not more than 130g//m2, it is best to use offset paper or copy paper. Coated paper can't be used in laser printers, mainly because of the foaming of coated paper caused by heating and setting during printing, which affects its use. ?

6, after the printer work, maintenance and cleaning work is very important. When cleaning the optical part, special attention should be paid not to collide, and metal tools should not touch the drum core to avoid permanent damage. When cleaning, pay attention to the invisible light of the laser to protect your eyes.