Causes and solutions of water leakage in toilet

There are many reasons for water leakage in the bathroom, which may be water seepage upstairs or water pipe problems. This paper will introduce the causes and solutions of toilet water leakage, and recommend professional waterproof reinforcement companies and waterproof materials to help you solve the problem of toilet water leakage.

Water seepage at the lower mouth of floor drain

The elevation of the lower outlet is not suitable for the ground or the equipment elevation between the guard and the cow, resulting in backward flow, poor drainage of sanitary equipment, recovery of leakage of the weak parts of the linoleum or decay of the linoleum; The height of the water outlet on the floor sleeve is too small, so the water leaks directly from the sleeve to the lower roof.

Insufficient waterproof height

Make the other side of the sanitary body appear wet spots or wander, and even flow to the next floor along the pipeline interface.

Professional waterproof buqiang company

I recommend you to be a company specializing in waterproof and water leakage in toilets-Qinglong Waterproof and Reinforcement Company.

All kinds of waterproof materials

Commonly used waterproof materials in toilets include JS composite waterproof material, HG203 sealing waterproof material and k 1 1 polymer waterproof coating.

The joint between the toilet and the drain pipe leaks.

Because the height of the sewer pipe is not enough, the depth of the toilet outlet inserted into the sewer pipe is not enough, and the interface is not filled; The waterproof treatment of the bathroom is not good. After the toilet is used, there is water on the ground, and the walls are wet, even the roof walls below are wet and dripping.

Local or overall leakage of the lower roof

Local or general leakage may be caused by local aging and cracking of the sleeve felt that is not well protected after the finished product is protected, or it may be caused by hollowing and cracking of the layer. The pipeline passing through the floor is not sleeved, and the R hole is not properly treated after drilling. Bricks, sawdust and other sundries are stuffed in the wet concrete, resulting in cracks at the junction between the concrete and the ground, which leads to the inability of the waterproof layer and leveling layer to drill holes to form water inlets. Water enters the gully layer through defects, which makes the roof leak.

Wellhead leakage in shallow pit

During the construction, the water interface of the squat pit was smashed and was not found. The rubber bowl is not firmly bound, or after it is bound with iron wire, the iron wire rusts and breaks, and the joint between the rubber bowl and the water in the squat pit breaks, so that water accumulates on the ground after the squat pit is used. The wall is wet, causing the roof and wall below to be wet and dripping.

Sanitary ware installation is not firm.

The reason is that the embedded wooden brick is embedded without permission or at the end of construction, the sanitary ware is not firmly installed, and the sanitary ware is loose and unstable when used, resulting in damage or water leakage of pipe fittings.

Dongfang yuhong waterproof material

I suggest you choose the product of Oriental Yuhong-Yuhong brand plugging treasure (quick setting). Yuhong brand plugging treasure (quick setting) is a powdery waterproof plugging material made of special cement and additives through a special process. It can be used for waterproofing and plugging leakage or gushing basement, and can be used for construction with water.