How to remove the switch?

The specific operation steps are as follows:

1. Usually, panels are plastic materials made of more or less flame retardant materials. Its components are very simple, the connecting wire is fixed by screws, and the panel is installed by button switch.

2. When removing the panel, you need to consider the position of the buckle. The general switch is used to buckle up and down. For example, take the switch panel as shown in the figure, press the switch, and then insert a screwdriver between the wall and the panel. Push the panel up with one hand at the same time.

3. With a slight pry, the panel buckle will spring off, and then the panel will be taken off. Be careful not to pry. You can push the panel up and down and pry it with a screwdriver.

4. If you want to replace the switch panel, please remove it. Generally, the fixing screws of the switch panel are under the keys, and the keys must be removed to screw the screws. The trick to get the key is to insert it from the gap above with a small screwdriver, push the key up with one hand, and then gently pry it off.