Doing Modeling Essay

Many people have written essays in their mundane day-to-day lives, right? Essays can be categorized into time-limited and non-time-limited essays depending on the time frame of writing. How to write a thoughtful and literate essay? The following is my collection of do the model essay, only for reference, let's take a look at it.

Making Models Essay 1

The sky is white, homework is done? Nope! And make artwork Ruben locks. Oh, that thing! Too hard, no or a few sticks to make a miniature chair. Or not, or too difficult, simply take four small wooden sticks, a wooden board to make a seat inserted not just?

Folded a few branches, and at the place to find a small wooden board, mouth nagging planks, there is a large wooden board in the yard. Into the house, find yourself a knife, there is a box on the inside of the house, glue to take, not on the sticky. This board is too thick, the board saw a small square. I can't, my hand is broken. Square boards have to be rubbed on a fancy wall, not much reaction, a little effect. The wall is from someone else's house, which is rather bumpy and not owned, so get it almost there and go fast. Sandy soil to the inside of the cuffs to climb, but also have to shake a little.

A rare moment of sweat on the body, back to the house to take a knife, careful to separate the thick boards, to reduce the height of the square, thinner, those branches are also sweaty hands grasp, with a knife cutting a wooden stick, not ah! Every knife down will be bent outward protruding that little bit, the hand can only top in the knife to add force, with a little force, and then with a little force, hand pain, all the blame for the knife is too blunt, dragged me down.

The eye is about to mold, broken, the stick is too thin.

Or first digging holes, with a compass to dig four holes in the board, and then draw a circle to repeat, I can not hold on, I really hope there is a drill to put the holes through.

Alas, still failed! But failure also has gain, I learned, be patient, do things seriously! I really did not expect the practice homework so interesting!

Modeling Essay 2

On Saturday, I went to a modeling class. The classroom teacher taught us to do model airplanes, in the process of making, I accidentally broke the wooden struts, no struts aircraft can not fly, I feel very sad, but also a little worried. After school, I told my mom about it, and she not only didn't get angry, but also said to me gently, "It's okay! Let's go home and fix it together, and the airplane will fly again."

Back home, my mom brought glue and tape to stick the two sections of the pole, but when I fixed the rubber bands on the ends of the pole, the pole broke again. This time, I was anxious, sad and cried. But my mom comforted me again and said, "Don't worry, let's think of something else." We racked our brains and tried many ways, but it still didn't work. After a while, my mom inspired me and said, "Can we change the stanchion?" I said, "Yes, but we don't have such a small wooden pole at home." Mom pointed out the window, so I realized that it was fall and the ground was full of branches and leaves that had fallen from the trees, so maybe a small branch could help. After some serious searching, my mom and I finally found a small branch about the same size as the model stub. Remove the bark, and then the twig ends chipped, pasted on the fuselage of the plane, installed the propeller, wrapped around the rubber band, I threw the model airplane to the sky, the plane shook a few times, rushed up to the sky, the plane flew, I jumped up happily.

I am very grateful to my mother, through this modeling, let me know encounter difficulties, do not be afraid, do not give up, to learn to use more brains.

Modeling Essay 3

Today, the composition class conducted an interesting activity experience class - popsicle modeling.

The teacher put six of us into a group and gave us two big bundles of popsicle sticks, a bottle of glue and a roll of double-sided tape.

When we got the materials, we immediately started to work on it. Each of us grabbed a handful of popsicle sticks and started to do our own work. Because of our different opinions, there is almost no way to put together what we did, so it is no wonder that "everything is difficult at the beginning".

After some communication, we decided to work together to build a house. But the problem is that everyone else has already done their own work, one person has done the floor, Hu Henghe has done the floor, Xu Yizhuo has done the grill, and the team leader has done a floor, and I'm still a two-handed control. In a moment of desperation, I thought of the windmill model in the video I just watched in class, so I made a windmill by gluing two popsicle sticks crosswise together. As a result, the teacher appreciated my windmill, which boosted my confidence! Finally, we put our house pieces together, put the floors and the windmill on the floor, used the grill as the roof, and put up a sign saying "Welcome to Vacation Paradise". In a short time, our group model is completed, we look at this unique house are happy to smile.

It seems that as long as you know how to improvise, bad things can be good things!

Making Models Essay 4

During winter vacation, my dad brought me to my big brother's house. Came to the big brother's room, only to see there one by one display a variety of LEGO assembled toys, my eyes full of envy, so I made up my mind to the family assembled toys to complete!

Back home, I couldn't wait to open the bag, I first prepared the materials needed to assemble, and then read the instructions carefully, then began the assembly journey.

First of all, I put the foam particles to key out, and then two pieces of yellow parts that look like fish bones to find out, and put them into: then, I will be like a fish like the roof with the beams to support up; at the same time, my plane assembled together with three layers. I was overjoyed and thought: hey, I didn't realize I had put together so much already. Just when I was happy, suddenly I found a place to spell wrong, really a step wrong, step wrong, it seems that I have to re-spell ...... After a while, I put a piece of like a little yellow man like parts to be loaded, in order to be safe, I also put the wings of the two sides of the balancer to be loaded. Finally, I put the motor on as well to speed up the airplane.

I was so happy to have accomplished so much, it was sweeter than honey!

I have always had a desire to make a model airplane myself. Summer vacation came, I prepared my own materials, drew a good drawing, and began to do.

One day during the summer vacation, I was making a model airplane, and the little girl Yoyo, a neighbor with whom I did not agree, came to the house uninvited. Pushing the door, she inquired, "Are you making a model airplane?" "Yes." I said. She rolled her eyes at me and added, "How can you possibly make this model airplane with your clumsy hands?" I ignored her and she got angry and said, "I curse you for not being able to finish it for a year, oh no, I should say you'll never finish it." After that, she huffed and puffed and went home.

Having just sent off Yoyo, who was obnoxious to the core, he welcomed his cousin, who was hooked on playing basketball. Cousin crashed open the door and shouted, "Cousin, play basketball with me!" "Go go go, play aside, can't you see your cousin I'm busy!" I skimmed my lips and looked apologetic. Cousin's face reddened, glaring at me "Humph, stinky brother, let you not play with me, I'm going to snatch your face water, so you can't make a model."

After saying that my cousin threw the basketball at me, grabbed the glue, and slipped away as if he had a layer of oil on the soles of his feet. I yelled something at my cousin and unlocked the door. Pulled out the spare glue and said, "Just your little trick, don't you think I know?" So I continued to do it.

Later, my cousin came back, I took it to my brother, who took a look at it and frowned and said, "You made this", "Yes, I can do half a day." I picked up the last part, put glue on it, stuck it on, and it was done. "Look at the wings are all crooked, think back then, I even won the model airplane contest!" After saying that, cousin walked out.

It's not pretty, but it's my first model! I put it carefully into the cabinet and collect it.

Making Models Essay 6

Today, several members of our group, led by my mother, went to the Youth Palace to make car models with a pleasant mood.

When we arrived at the Youth Palace, we came to the science and technology modeling room to make models under the guidance of the teacher. The teacher gave us each a box of car model teaching equipment, then, they teach us to do. First of all, we have to install the tap, and the front wheel set of wheels and tires put together, with a Phillips screwdriver through the step screws locked in the middle of the tap frame hole. Next, we're going to put the faucet and the faucet stand together, put the NFC only ID chip on the battery module, and insert the guide module. Then, we have to install the phoenix tail and slip the rear wheelset tire into the drive module, then snap it into the phoenix wing and snap the phoenix tail into the creep module. Finally, we insert the motor into the drive module, snap it into the battery module, and lock it down with the shell. Haha finally done. I couldn't wait to turn on the power and put the little car on the table. Only to see the little car running around sideways, all of a sudden dropped to the ground. Oops! My goodness! The car fell apart! I was caught off guard and picked up the parts. Alas! I had to patiently put it together again. After a while, I finally got it back together. Then, I carefully put the car on the track, turn on the power, only to see the car like a cat scurrying around, really interesting! Suddenly, a flash of red light, the car hit the edge of the runway, flipped a four feet to the sky, making the students laugh.

This activity makes me know: as long as there is patience, no matter how difficult things can be successful.

Model Making Essay 7

This morning, we went to the Youth Activity Center of Pudong New Area. I got a lot out of it!

When we got there, we went up to the third floor to the bridge-making classroom. The teacher said to us: "Good morning, students! We'll start today by learning something about bridges. Finally, let's learn to make a bridge!" When the teacher finished, my heart was sweeter than honey because I liked making bridges very much. Through the teacher's explanation, I have a further understanding of bridges. I learned that there are cable-stayed bridges, iron bridges, arch bridges and so on. I also know the knowledge of Shanghai Nanpu Bridge, Yangpu Bridge, Xu Pu Dajiao and so on.

After learning about bridges, the teacher let us learn to make bridges. I then worked with Lin Rong and Zhang Wenjing. I first drew an arch bridge and then modeled the bridge. During the process of making the bridge, we encountered a lot of frustration and difficulties: the circle of the arch bridge was too difficult to build. Not only did I not finish it, but I also made a mess on my hand. Despite the difficulties our group encountered, we didn't overcome it and were ready to stop building.

When it was time, the teacher asked the students to come up and talk about the bridges they made. Only to see Jiang Xinxin and Zhu Jiali, Chen Xiaoling and Pan Jiajie, Wang Sijia and Zhu Ying, Sheng Li and Guo Weiyu and other students have built a bridge. I regretted in my heart: if I had known that, I should have tried to glue the bridge well in the first place, so that I would have done it successfully.

This time, making the bridge taught me: no matter how many setbacks I encountered, I could not back down.

Model Making Essay 8

I made a model at home today and I was really tired.

I made a Li River landscape. I found a piece of cardboard, took my little scissors, clicked and cut up a piece for the base. On the floor with watercolor pencils swish up. Then I drew some mountains on A4 paper and glued them to the cardboard. After that, I used a piece of cardboard to fold a "boat". After I finished, I thought complacently: I'm so smart, I can come up with this, it's simple, but also has meaning. If I hand it in like this, I'm sure it will pass. Just when I was immersed in my imagination. Dad paced over, said: "you see what you do, that paper to be a mountain, how to say also use a cardboard it; and this boat, this can be called a boat? It is clearly a hat upside down." And then gave me the idea: "You can use cardboard to draw a mountain, and then cut a slit in the cardboard, stuffed, it can be, the boat is also so cut, not good? Look at the water. Are you sure it's the Li River? It's the old polluted river in my hometown!"

I suddenly realized, first with the green painted on the cardboard, so it is not a green color? Then take a milk carton and cut it out in the mountain`s shape and color it in. Then cut out the bit where the mountain is and stuff it in.

When it comes to the boat, I have a problem, how to draw the boat? I began to look for it in the three hundred Tang poems where. Found, I immediately draw on cardboard, cut out. And in the boat bit cut out, stuffed, with transparent glue, much better than before.

I'm really happy, I'm not good with my hands, after this time I finally made such a difficult model!

Modeling Essay 9

I've been modeling airplanes for most of my classes since I joined the modeling class at the Youth Palace. On Friday, the teacher told us: this class we do small car models. I was so happy that I could finally make the small car model I had dreamed of.

While handing out the materials to make the model cars, the teacher said to us, "There are two kinds of cars on the drawing. One is a wind-powered car and the other is an electric car. I suggest you make the wind-powered cart." As soon as I got the modeling materials and tools, I couldn't wait to unpack the bag. I took out my sticks and tried to make the little container for the batteries first. As soon as I mounted it, yikes! The wooden stick was too thick to fit in. I immediately took a wood chipper and cut off a small section of the stick, and then slowly installed it into the small container, success. Next, I installed the front wheel of the cart. I followed the drawing and found two parts first, a screw, a small stick and a wheel. I first attached the two parts, tightened their nuts with a screwdriver, then attached the small stick and pressed on the front wheel. Later, I pressed on the back wheel.

I mounted the motor, installed the propeller, put the switch in place, and filled the container with iron. And just like that, a simple wind-powered cart was born. I excitedly walked to the podium and asked my teacher for two batteries. I put the batteries in the container and flipped the switch. Huh? How come the cart ran slower than a snail? I took the cart to the teacher for help. The teacher looked at it and said, "Your front wheel is too loose and slanted." I immediately reinstalled the wheel. See, my little car ran really fast! I rushed to the track made by the teacher to test it.

The teacher told us that in the next class we would change the car into an amphibious vehicle. Ha ha, the modeling class was so much fun!

Making Models Essay 10

"Ah!" I yawned "Math homework done!"

Looking out through the window, the fiery red sun was about to set, it put away its blinding light, like a shy little girl. The surrounding clouds are even more colorful: some are like kittens, lively and lovely; some are like puppies, running and spreading joy; some are like tigers, majestic ......

I picked up the bag of science materials in my hand, and opened it to see that there was a bag of flour-like things inside. What is this? I fixed my eyes on it and it turned out to be a bag of plaster powder.

What is this for? With the question I turned over the instructions. After reading it carefully, I began to prepare beforehand, ready to show off, make a few animal models to play.

What do I need, you ask? A cup of water, a soap box, a cup of thick soapy water, a chopstick and a bag of plaster powder. And you're ready to start. First of all, pour the plaster powder in the soap box, and then add the water and stir, it is simple to say, but the first time to do, it is inevitable that there will be problems. This is too much water, too little gypsum powder, I harvested a box full of "milk".

The first production was declared a failure. I didn't give up, but started the second production.

Learning from the previous lesson, I properly added some less water, and then stirred with chopsticks, a box of "plaster paste" was born.

After the "plaster paste" is done, I poured the pre-prepared soapy water into the mold, and then poured the excess back into the bottle of soapy water. Finally, just put the "plaster paste" into the mold. 10 minutes, 20 minutes, the plaster is not like the book, twenty minutes to finish. An hour later, I turned the mold upside down and gently knocked, a cute puppy model came out!

Modeling is fun! We should not always be addicted to online games, you can do some cute models!

Today, I read a book called "Romance of the Three Kingdoms", in which my favorite character is the famous Zhao Yun. It just so happens that my father is free today, take me to the pedestrian street to buy a model. Once into the model store, I saw many models, a wide range of goods to see my eyes dazzled, do not know which to buy. So I remembered my favorite character in the book and chose the model of Zhao Yun. When I got home, I quickly opened the box, took it out, and immediately moved.

First of all, I found the model of the head, and then scissors to cut it down and then aligned with the socket force inserted, but because the socket is too small, I simply can not insert. I started to get anxious and didn't know what to do. My dad came over and asked me what was wrong. I quickly and anxiously said ": I this Zhao Yun's head can not be inserted, so very anxious, do not know what to do?" Dad kindly touched my head and said to me: "Do not be anxious, you think again" I was inspired, I thought yes! I can use scissors to make the socket a little bigger, so it can be inserted. So I used the scissors to poke the head of the Zhao Yun, and then turned it a few times. The socket really got bigger and I was able to make my model fit in. Then I did the body, waist, hands and feet in the same way.

Finally, I used colorful stickers on Zhao Yun's armor, body ...... to make it more handsome. Looking at the lifelike model I made, I felt beautiful in my heart.

Making models essay 12

"Haha, it really flew!" "Mine is the same." This is what we explored during our Discovery Day at the District Youth Science, Technology and Cultural Activity Center.

My group was learning to make models. Ms. Wang introduced us to the "three models," and we were going to make an empty model. The teacher first showed us the work. "Wow! It's so cool!" "It's so handsome!" "So dominant! What a bull!" All that reached my ears were the exclamations and admiration of my classmates. The teacher finally handed out the materials, and Mr. Pan, who was leading the team, asked for a copy and did it with us. We followed Mr. Wang's instructions and the steps shown on the computer, folding, bending, pasting, and putting together. The outline of the model slowly came out. Although we encountered a lot of trouble on the way, we worked together and those problems were solved. We're running out of time, so we'll have to put away the model and materials for now and go back to school.

In this way, we got to school and started to make the final part. A perfect airplane model was completed in our hands. Many students were eager to try to fly, but only flew for a while, the model fell down. It seems that people still can't be in a hurry!

Through this modeling, I have a deep feeling that a person should be careful and patient, and with dexterity, one can make a perfect work.

The modeling essay 13

On Sunday, in one of my science classes, the science teacher set up a homework assignment for our group: to make a model of the universe, and we decided that no one should make one, but rather to see who did a good job, and I thought to myself: to make a model, simple!

As soon as I got home, I began to think: what kind of model of the universe? Suddenly I remembered the science book on a model of the universe, I moved to look for support, the home rice the bottom of the sky, I thought of chopsticks, I took out a pair of chopsticks from the chopstick cage, ready to go. Remember to buy chopsticks yo, mom smiled and said: good, ah, so scary ah.

I took the chopsticks, found the nails, a burst of hammering after the chopsticks cracked - I thought, a moment to stick put!

The next step was to think about the stars. I found a book that I hadn't used in the last semester and scratched out the Sun, Mercury, Mars, Venus, Jupiter, Saturn, Uranus and Neptune on it. Finally cut out with scissors, in tethered to the line on the line.

I wasted a lot of hard work, and finally the world's most simple model to do it, although simple, but also good.

One day during the summer vacation, I took part in a science and technology workshop organized by the Greenwood Bay community with great joy.

It was a cool day, and the heat was unbearable. I ran all the way to the Youth Palace against the sun. When I got there, more than twenty people had already arrived. At last count there were more than thirty students attending.

We first went into a classroom. The teacher gave each of us a bag containing tools for modeling. The teacher took out a rectangular chassis and inserted two axle seats into the two holes on the chassis. Then the wheels were placed between the axle holders and an axle was inserted. Next, put the battery holder on the chassis, what can be used to fix it? I suddenly found two nails, so I used two nails to secure the battery holders. Then I used the fastening straps to fasten the motor...and that's how I put the car together step by step.

There is only a switch on the top of this car, and the motor, batteries, wires, and other things are underneath, covered by a board. It really looks like a tricycle. The beauty of it is that it doesn't have a shell, it would look better if it did. I am very happy to look at it.

By this time, many others were done, and I started a fierce chase with them.

The first time I lost the race because a part didn't fit properly.

The second time, at the beginning, we were evenly matched, and the speed was about the same, but the others were running a curved straight road, and I was running a curved road. Seeing that we are going to lose, the front of the car twisted and crashed together, and came to an inverted onion. I finally won.

I have a deep feeling about this incident, I later recalled: that morning, I learned in the Youth Palace, more than I usually learn, because I know, do everything to be fully concentrated.

Modeling Essay 15

That day, after I finished my homework, I picked up the bag of science materials in my hand and opened it to see that there was a bag of flour-like things inside. What is it? I fixed my eyes on it, and it turned out to be a bag of plaster powder.

What is this for? With the question I turned over the instructions, only to know, with the plaster can do a variety of models. So, according to the instructions, I began to prepare beforehand, ready to show their hands, do a few animal models to play.

You ask me what to prepare? A cup of water, a soap box, a cup of thick soapy water, a chopstick and a bag of plaster powder can start. First of all, pour the plaster powder in the soap box, and then add the water to mix, said simple, but the first time to do, it is inevitable that there will be problems. There was too much water and too little plaster powder, so I got a carton full of "milk". The first production was declared a failure. I didn't give up, but started the second production.

Learning from the previous lesson, I properly added some less water, and then stirred with chopsticks, a box of "plaster paste" was born.

After the "plaster paste" is done, I poured the pre-prepared soapy water into the mold, and then poured the excess back into the bottle of soapy water. Finally, just put the "plaster paste" into the mold. 10 minutes, 20 minutes, the plaster is not like the book, 20 minutes to finish. An hour later, I turned the mold upside down and tapped it gently, and a cute puppy model came out!

Modeling is fun! Instead of being addicted to online games, you can make some cute models!