Tile paving wall to be how to tile tile paving wall what are the considerations

It is understood that many householders build the TV wall preferred tiles, because they are not only very delicate and beautiful, but also has the characteristics of simple operation and easy construction, so they are highly recognized and accepted by users. So, how do you tile paving wall? What should you pay attention to on tile paving wall? Let's take a look!

Tile paving wall how to lay

1, Tile paving wall how to lay - wet paste method

Wet bonding method is one of the most commonly used paving methods in the past. It is an old process of placing a stencil on the wall and then bonding the mortar. This method is prone to wall contamination, hollowing out and falling down.

2, Tile paving wall how to pave - dry paste method

The method uses dry pulp dry powder and adhesive as raw materials, then flatten the tiles with cement mortar wall and the said tiles are flattened. This method is effective in preventing the appearance of hollow drums and the like.

3, Tile paving wall how to pave - wet suspension method

This method is relatively simple. First of all, the bricks on the wall are fixed by the method of connecting the two. After well, the cement is poured into the cement to create a paste effect.

4, Tile paving wall how to lay? -? Hanging dry method

Dry suspension method does not need with mortar as long as the metal sheet suspension is used to directly hang tile metal frame on the paving. This paving method can not only avoid falls, drums and other phenomena, but also easy to construct, save time and labor.

Tile paving wall how to pave the notes

1, open the package and move with care. Do not scratch other tiles.

2, the product should be placed vertically before and after unpacking, not flat.

3, Avoid friction between tiles when moving.

4, when the protective film is activated, first lift the protective film from all sides, and then slowly tear one side of the protective film, do not use too much force.

5.Do not remove the protective film before installation.

6, When you touch the product, put a piece of wood on the tile. Don't hit the tile surface directly.

7, before laying, the wall must be leveled first, and then the pattern must be spliced according to the bottom numbers of the tiles.

8, please do not open the protective film immediately after gluing. Wait until cleaning is completed before activating the protective film.

9, check the strength of the wall adhesive before paving. If it does not meet the requirements, it should be strengthened.

10, in order to avoid scratching the surface pattern, the front of the product should be placed on soft paper or cloth to operate.

Tile paving wall how to lay and knowledge about Tile paving wall how to lay preventive measures. The following is for those who need more information.

Tuba Rabbit online free for everyone to provide "each decoration offer, 1-4 local decoration company, 3 sets of decoration design plan", and decoration to avoid pit strategy! Click on this link:/yezhu/zxbj-cszy.php?to8to_from=seo_zhidao_m_jiare&wb, you can get it for free Oh~