Design effect of rural residential reconstruction

Rural housing renovation design renderings

Rural housing decoration design renderings, in our daily decoration, will use a lot of materials, so it is best to be ventilated after decoration, which is also responsible for our health. Let's share the renderings of the renovation design of rural houses.

Rural housing renovation design renderings 1 rural dangerous house renovation pictures

Because of the lush foliage in the yard, you can put some tables and chairs under it to facilitate the daily cool and rest. Pay attention to the selection of moisture-proof materials to ensure that they will not be destroyed by humid air.

In order to make the house more space, we use sloping roof, which can not only expand the space but also avoid rainwater accumulation. The courtyard ground is irregularly spliced with marble, which can not only form a sharp contrast with clean houses, but also set off artistic beauty. The use of marble material makes it stronger and more beautiful than other stone paintings.

The designer suggested that a heater could be installed in the backyard of the house. At night, we can not only see the beautiful scenery of the starry sky, but also warm and illuminate, which makes our whole house full of warmth.

In order to facilitate residents to see the courtyard and the scenery outside, we installed large glass wooden doors at the junction of the courtyard and the house.

Because we mainly use the simple style of the countryside outdoors and the exquisite, tall and elegant decoration style indoors. In the living room, we hung a European chandelier through the sloping roof, which added a little color to the room and was full of religious flavor. Under the chandelier, we use a solid wood square table and a solid wood floor, which is very ceremonial. The texture and color of solid wood make the whole room look orderly and warm and comfortable.

The living room and kitchen are connected together, which makes the whole room feel enlarged from the visual space and ensures the lighting and ventilation of the whole room.

Let's talk about the bedroom area again The windows of the two bedrooms are still made of glass wooden doors. The bed in the master bedroom is ventilated and bright by the window. The dressing table can be placed on the left side of the bed, and some works of art we like can be placed on the right side. The whole room looks fashionable.

The decoration of the second bedroom will be more concise. We use desktop fluorescent lamps, just like the morning sunshine.

Because the second floor is a sloping roof, we can hang lights on the slope, and the whole wall is mainly warm.

Large French windows can enrich the view. As soon as we open the curtains in the morning, we can see the beautiful scenery and make our family feel good every day.

The wall of the master bedroom is very beautiful, because we installed storage boxes to save space. The master bedroom has a separate bathroom, and the communication space between the bathroom and the bedroom is large enough.

The pool in the bathroom is black marble, which doesn't look dirty. The window adopts zipper window, which is mainly designed for the privacy protection of the bathroom.

The swimming pool behind the house is a highlight of this mansion. Blue tiles turn the color of water into blue, in contrast to the warm color of efforts. Put some benches by the pool and enjoy the sunshine at will.

Effect of rural residential renovation design Figure 2 Rural residential renovation design

1. Dismantling the old rural houses The first step in the reconstruction is to dismantle the floor and wallpaper of the old houses, as well as some electrical appliances, lamps and lanterns in the bathroom and the skirting line of the roof.

2. After all the above drainage and heating pipes are removed, the toilet, kitchen, living room and balcony should be provided with drainage pipes and heating pipes.

3. Woodworking Woodworking generally produces and installs crossbars, walls, doors and windows, and roofing carpentry takes about a week.

4. The next step of circuit engineering is to transform the circuit according to your own lighting requirements, such as the direction of the light and the switch, which need to be punched.

5. After the floor tile has done the above process, the next step is to lay the floor tile. When laying floor tiles, you should first lay the floor tiles in the bathroom and kitchen, and then lay the floor tiles in the bedroom and living room.

6. Painting Usually, only doors, roof walls and entrance areas need to be painted.

7. After the surface engineering of installing the sink and wardrobe is completed, the next step is to install the sink and wardrobe in the kitchen. The whole process can be completed in one day.

8. Install the socket and switch panel. After all the above steps are completed, install the socket and switch and install the lighting.

Effect of rural residential renovation design Figure 3 Modern apartment types are divided into flat roof, sloping roof and curved roof according to the roof form. The design of self-built bungalows in rural areas has the following points:

1. Composition of the top floor of the bungalow

Roof layer-plays the role of enclosure, impermeability and drainage.

Load-bearing structural layers-roof beam-slab structure, roof truss and spatial structure system.

Insulation layer-thermal insulation.

Ceiling floor-beautiful decoration, installation of lamps, buried pipelines, and sometimes insulation and ventilation.

2, the function of the bungalow roof and safety design requirements

(1) is waterproof and reliable, and the drainage is rapid.

(2) Good thermal insulation performance

(3) the structure is safe and reliable

(4) Beautiful appearance

(5) Other functional requirements (roof garden, apron, solar collector, etc.). ).

3. Slope design of bungalow roof

All roofs must have a certain slope, and bungalow roofs are no exception. The slope of a bungalow roof can be formed by padding, that is, using light materials to pad the slope, or using bent frames to find the slope, that is, using roof panels to form the slope.

The expression methods of slope include slope method, percentage method and angle method. The slope of bungalow roof is less than 5%, usually 2% and 3%, and the slope of owner roof is usually 1% or 2%. There are many factors that affect the slope. Common factors are:

A. Roof structure form

B. Roofing waterproof material

C. Local climatic conditions

D. Building facade modeling

E. Roof use function

4. Drainage design of bungalow roof

A, unorganized drainage-cornice board, let the rain on the roof freely fall into the outdoor ground aproll. This method is mostly used in areas with less rainfall (areas with annual rainfall ≤900mm).

B, organized drainage

When the annual rainfall is > 900 mm and the cornice height is > 8 m, or when the annual rainfall is < 900 mm and the cornice height is > 1m, organized drainage should be adopted to drain the roof rainwater into the gutter or eaves gutter, and then to the open ditch or culvert through the rainwater pipe.

(1) external drainage: the gutter is selected around the roof or at the vertical cornice, and the rainwater outlet is set at the bottom of the gutter to connect the rainwater pipes.

Parapet drainage-the parapet is higher than the roof, the inner slope is padded, and the rainwater outlet is set at the bottom of the wall to connect the rainwater pipeline outside the wall.

Parapet gutter drainage-both the gutter and parapet are set, and the bottom of the wall is provided with a drainage ditch, and the bottom of the ditch is provided with a rainwater outlet connected with a rainwater pipe.

(2) Drainage ditch is set in the parapet-drainage ditch is set in the parapet, and rainwater outlet is set at the bottom of the wall to connect rainwater pipes.

Inner gutter-a gutter is set in the middle of the roof along the longitudinal direction, and a rainwater outlet is set at the bottom of the gutter to connect the rainwater pipe.

Internal drainage-a rainwater outlet is set in the middle of the roof to connect the rainwater pipe.