How to install under ikuai8 soft router

Methods/Steps

Installation steps:

1. Unzip the ghost installer file of ikuai8 downloaded from this site.

2, in the appearing ghost interface, select Local->Dist->FromImage

3, select the downloaded ikuai8GHOST image package

4, in the appearing interface, press tab, select ok, and enter.

5, in the interface that appears, select your DestinationDrive (usually choose the default can), and enter.

6. In the interface that appears, select yes, and enter.

7, wait for the ghost finished, in the interface that appears, select ResetComputer.

After the installation, the cable will be connected to the network card to go, in the console click enter, lan shows "connected", it means that the network cable is connected to the right.

Check if there is any ip conflict between your intranet and ikuai8's system ip.

The above is the installation tutorial of ikuai8 flow control soft router, after that, you have to make relevant settings, as long as you input 192.168.1.1 in the address bar of the browser and press enter, the default username and password are admin.

This is the first time for ikuai8 to install the soft router.