How to disassemble the inner barrel of washing machine

1. Be sure to unplug the power plug before removing the inner cylinder of the washing machine to prevent electric shock. Then open the lid of the washing machine and unscrew the screw at the bottom of the inner cylinder. After unscrewing the screw, pick up the raised blade with both hands and lift it to remove it.

2. After taking out the blade, you can see that there are four screws at the bottom of the washing machine. Unscrew them with a screwdriver and put the screws in the specified position, which is easy to find when installing.

3. Then start to take off the cover. There is a screw on the left and right sides outside the washing machine. Open the shell and tighten the screws. There are two screws at the back, which are also unscrewed.

After unscrewing the four screws on the outside of the upper cover, you can lift the upper cover. Because the top cover can't be completely removed and connected with wires, you must be very careful. You must turn it back and find someone to support it.

At this time, you will find a lid on the bucket. Unscrew the four screws and lift them up slightly to remove them.

5. Finally, just shake the inner cylinder, and you can take out the inner cylinder of the washing machine.