What kind of motorcycle is locked against theft?

The front lock of the new motorcycle and the front lock of the motorcycle being sold in the market have poor anti-theft performance, which is more traditional and single. Most of them are made of aluminum alloy by die casting, and their damage resistance is poor. This design has many defects. 1, the product shell itself is relatively thin, easy to break and poor in damage resistance. 2. The material selection tends to consider the manufacturing cost of the product, ignoring the strength of the lock body itself, which is easy to break when squeezed by external force. 3 The screw hole in the installation position is too shallow, and the lock is easy to loosen when the motorcycle vibrates during driving. 4. The car lock is fixed with only two screws, and there is no other protection. Under the action of external force, the screw is easy to break under great pressure. 5. The lock core is poorly fixed, and it is easy to pry it open with tools such as a screwdriver. Although U-locks and disc locks are troublesome, owners have to add other locks such as U-locks and brake locks to reduce the probability of motorcycle theft.

The car thief first cuts the grounding wire of the motorcycle, and then forcibly opens the front lock left and right with the ready-made lever of the motorcycle handlebar. Cause the aluminum alloy shell of the front lock to break or break two fixing screws, and ride away with your feet. It only took a few seconds before and after, and the whole process of stealing a car was over.

The new head lock produced by Zhuhai Niu Ben Lock Industry has strong anti-theft performance, and it is convenient, quick and uncomplicated to park and lock the car. When locking the car, you don't need to lock the car with a key, just tilt the front of the car to the left and gently press the lock cylinder with your hand, so you can easily lock the car.

New head lock; Highlight1; The lock body is made of all-steel solid, which can't be broken by prying. The whole lock is saw-proof, pliers-proof and hammer-proof. Highlight 2: The new product is unique in that a groove 3mm deep is designed at the installation position to clamp the steel plate of the three-star rack installation lock, so that the lock and the rack are integrated. Effectively protect the lock core and the fixing screw from external force, and the motorcycle handlebar will not damage the lock by left and right force. Highlight 3; The ball-hole lock core is selected, which is convenient and fast to lock the car without a key, and the anti-pry performance is better than that of a one-hole lock core. Highlight 4; The fixing screw hole of the new headstock lock is 15mm deeper than that of the ordinary headstock lock to prevent it from loosening due to long-term vibration. In addition, it is equipped with two 16mm*M6 steel national standard screws to increase the prying force. Highlight 5; Double safety 1 is adopted for the installation of lock core and car lock shell, and the positions of lock core installation holes in lock core and shell are positive tolerances, which are closely matched with hydraulic pressure. 2. Of the two screw holes installed on the vehicle lock, the screw hole (B) is located at the connection edge between the lock core and the housing, and the thread of the hole B is on the lock core but on the lock housing. After the car lock is installed, the screw locks the lock shell and the lock cylinder at the same time to prevent the lock cylinder from being damaged by external force. Highlight 6; Surface electrophoresis treatment, black frame, improving anti-corrosion and anti-rust performance, not easy to take off paint. High-end and beautiful.