Disassembly method of horizontal washing machine

Disassembly method of horizontal washing machine:

First, prepare the tools.

1. Check whether any tools are missing, and make sure that all tools used during disassembly are complete.

2. Prepare some paper towels, clean cloth, drainage basin, and containers for placing screws and parts for easy disassembly.

Second, the disassembly process

1. Power failure. Disconnect the power of the washing machine, first turn off the power switch to ensure that the power has been cut off.

2. Drainage. Put the drainage pipe into the drainage basin or container, remove the fixation between the drainage pipe and the drainage pump, loosen the screw below the water outlet of the drainage pump, and remove the drainage pump.

3. Remove the water tank. First, close the two angle valves of the water inlet pipe and take out the water inlet pipe. Then remove the front panel of the washing machine. After removing the panel, put it back in the washing machine. Then, take out the shockproof rubber sleeves on the four silencing feet, unscrew the bolts on the feet with a wrench, and then remove the water tank.

4. Remove the electrical control panel. Remove the top cover of the washing machine, remove the panel, find the electric control board, and remove the electric control board. Note: The pipeline and water valve beside the water tank cannot be disassembled.

5. Remove the shell. Remove the front power supply plug wire from the safety lock, remove the triangle with a screwdriver, and then remove the shell, and you can see the internal structure of the washing machine.

In short, it is relatively simple to disassemble the horizontal washing machine, and it can be easily completed with patience and correct methods.