Can the driving recorder be installed by itself

Sure, the specific operation steps are as follows:

1. Install first. It is to fix the recorder on the rearview mirror of the original car with a clip.

2. planning. How to connect the wires, whether to go directly to the cigarette lighter or somewhere else. Put a three-in-one in the glove box to connect the central cigarette lighter, tape recorder and portable navigation, as well as the electronic dog, all of which are three-in-one power supply.

3. wiring. Because you walk from the glove box, you should insert the thread behind the glove box and insert it by hand. The mold there is also loose. Just insert a little bit and walk along the mold to the right. When you reach the upper right corner of the front seat, you will walk under the soft plastic by the door, as shown in the picture below. Gently pry it open with a flat screwdriver, and the thread can be inserted and followed.

4. Wear it from below. As I said before, if I had planned it from the beginning, I wouldn't have to wear it. Let me take off that black tractor. It is a damping retractor, which is convenient for wiring. Hang it on your head.

5. Connect the electricity from the cigarette lighter, and stick three wires in a tray to the central control with three transparent tapes.