How to fit a 60 wood opener

The main steps to fit a 60 wood hole opener are as follows.

1, disconnect the power supply of the hand drill, unplug the power cord of the hand drill from the socket.

2, both hands wearing gloves, one hand holding the hand drill, the other hand pinch the hand drill gourd mouth, rotate hard to let the hole for the drill bit exposed, if the front end of the hand drill has a ring of teeth, it is configured with a special key to twist, loosened to reveal the hole for the drill bit installation on the good.

3, take out the drill to be installed, placed in the front of the electric drill exposed holes, with a hand clockwise rotation stuck drill.

4, adjust the depth position of the stuck drill bit into the hole, and use the special key to twist clockwise to lock.

5, plug in the power cord of the electric drill plug energized, idling for 2 seconds to observe the electric drill drill bit is installed firmly