Traditional Culture Encyclopedia - Traditional festivals - Cabinet Door Measurement Video Tutorial, Cabinets for the finishing touches
Cabinet Door Measurement Video Tutorial, Cabinets for the finishing touches
Cabinet Door Measurement Video Tutorial
First of all, measure the length of the cabinet door, the length of the measurement of the general measurement of the 2 times, because there will be an error, the first from left to right measurement, and then from right to left measurement, compare the two measurements.
Secondly, measure the height of the ceiling, measuring the height also needs to be measured several times, you can measure from several directions that do not pass through, and at the same time, you need to pay attention to see if there is no beam.
Third, make measurements should pay attention to look at the waistline, maneuvering the bottom of the socket to the height of the floor tiles, also need to pay attention to is the height of the window, of course, this also need to pounds of watermelon several times to measure.
Fourth, in addition to pay attention to the height of the window also need to measure the height of the gas meter and pipe from the wall, drainage, in and out of the height of the water lights, also need to carry out 2 measurements.
Fifth, in addition to measuring the above, you also need to pay attention to the ground there are no steps, look at the wall there is no bumpy beams, these will affect the size of the cabinet size.
Sixth, the need to flow out of the refrigerator, pay attention to the length and height, all measurements need to be re-tested
Seventh, if there is a door set of places also need to be the thickness of the door set, open the sliding door to leave a gap, generally 10-20MM
Cabinet maintenance tips:
1, cabinet countertops should be kept clean and dry. Long-term practical, there will inevitably be water stains, we must often keep the countertop dry, to prevent the countertop deformation of open glue, which leads to countertops are not beautiful.
2, practical cabinets should also avoid some of the country China or sharp objects, because too heavy or oversized objects will lead to insufficient countertops to withstand, and thus deformation, and do not use too cold or too hot water to rinse the countertop.
3, cabinet countertops should always maintain the degree of finish, if there are knife marks or scratches, you can use 400-600 mesh sandpaper grinding, has been grinding until the traces disappeared, and then use the detergent and cloth will be cabinet countertops back to the original appearance, so that the countertops can be maintained the beauty of the degree.
4, often on the cabinet countertops for cleaning, you can use soap book or detergent for cleaning, if it is limescale, you can use a wet rag to scrub the limescale clean.
5, daily some with chemical properties of the items do not too sticky contact with the cabinet, like paints, metal cleaners, etc., this feeling items will corrode the countertop, such as these items in contact with the countertop to be rinsed with soapy water, and then rinsed with water.
About the cabinet door measurement video tutorial is introduced here.
- Previous article:How to draw the traditional pattern in qq dazzle dance ranking
- Next article:Auto parts development status and trends
- Related articles
- How to catch Mandarin fish with hand rod
- Selected as10 excellent composition on preventing myopia in 2022.
- Dragon Boat Festival Handmade Works Tutorial Video
- Which beef noodles in Baiyin are delicious?
- How is face recognition realized?
- The research level and present situation of sports marketing at home and abroad, and what problems remain to be solved in the research?
- How was the West Lake in Hangzhou formed?
- What snacks do Zhangjiakou specialties have?
- Active or passive elastic stretching refers to
- What are some examples of morals in life?