What materials are needed to make your own wooden door?

Tools: carpenter's saw, carpenter's hammer, wooden horse stool, wooden push planer, pencil, tape measure, right angle ruler, brush, dowel cutter, sandpaper, paint, paint brush .

Doing the door is actually the most important step of the pressure door. First choose the core board to be, in accordance with the shape of the door to spell, and then on the white latex, to be 80% dry or so paste together, and then flat, and then put a heavy weight on the door panel pressure. After the pressure is good and then nail wood line pressure door board edge. If you want some wallpaper on it can be directly paste. The back is left to install. Attention to the problem is still there: for example, the size of the door frame, nailed to the wood line with the door set to compare the next, if the door is too large, you can use a woodworking planer to rest. And nailed after the pressure strip is best to install the track, hanging wheel, the door mounted on the first good to make adjustments to avoid wallpaper back door is not appropriate. If you do it yourself when you press the door it is best to do a good job of the door cover, and then calculate the size of the door, the general allowable door left and right side of the seam in about 5mm, the upper side of the 5mm, the lower side of the 8 ~ 10mm or so. Then subtract the size of the mullion, after a good reduction, you can be on the door under the material. Materials used: large core board, wood strips, white latex, 2.5cm gun nails.