What is the installation process of photovoltaic power generation?

Photovoltaic panel installation process:

1. Site selection

The sun should be able to shine all year round (such as on the roof of a building).

2. Make the foundation

After determining the azimuth angle according to the geographical location, combine the bracket form of the photovoltaic module to make the bracket foundation (such as a concrete base).

3. Install the bracket

Install and fix the bracket to the foundation, and adjust the azimuth and elevation angles.

4. Install photovoltaic modules

Install and fix the solar silicon crystal panels to the bracket according to the pre-designed plan.

5. Electrical connection

First of all, the electrical grounding of the bracket and photovoltaic modules must be done, and then the wiring of each solar silicon crystal panel should be connected according to the design.

6. Electrical debugging

After the wiring of the solar silicon crystal panels is connected and checked, connect the inverter, battery pack and other equipment for joint debugging.

Precautions for installing photovoltaic solar panels

1. Do not install photovoltaic solar panels in shaded places such as trees and buildings. Do not go near open flames or flammable materials. The assembly structure should be able to adapt to environmental requirements. Please choose appropriate materials and anti-corrosion treatments. Use reliable methods to install components. If the components fall from a high altitude, they may cause damage or interfere with the safety of people and property. Do not disassemble, bend or hit the components with hard objects. Avoid stepping on the components.

2. Use spring washers and flat washers to secure the photovoltaic solar panels to the bracket. Ground the panel assembly in an appropriate manner according to the site environment and the state of the mounting bracket structure.