How to make a bookshelf handmade simple

How to make bookcase handmade simple

How to have easy bookcase? Let's make your own bookshelf by hand.

1, prepare the following materials: wooden board, screwdriver, screws.

2, cut the board

Before making, first cut the shape of the board. Vertical boards must be the same size, either large or small, large enough to put heavy books, and these only need some changes in length and width. The trick is in cutting nice curved lines. Horizontal planks are basically straight as well.

3. Sawing out the horizontal and vertical shelves

Precisely sawing out the notches where the horizontal and vertical shelves fit is the *complicated* step of the process, cutting three notches per horizontal board, one in the center, and notches on the vertical boards to suit your needs. Adjust the position of the notches according to the size of the book. Measure it accurately, mark it, and then cut the notches.

4, assembly

After the preparatory work is completed, all the boards can be assembled, and then disassembled, on the paint as well as varnish. After all the painting is done, assemble the boards where you want to place the bookshelves. Except for the piece of planks used to make the top shelf of the bookshelf you don't need to put it on first. Drill holes in the notches for the top shelf, insert screws through the boards, and drill holes in the wall at the appropriate points to hold them in place. If you are concerned that there is not enough wood in the notches, you can drill holes in the boards above the notches. The whole bookshelf is shaped, and you can't see these small holes, very beautiful.