How to install the bath bar bath bar installation precautions

Bath heater is now one of the bathroom appliances installed in every home, which allows us to have a comfortable bathing environment in the cold winter. So do you know how to install the bath bar? Below we will take a look at how to install the bath and related notes, the need for friends can come to learn about it!

Bath heater how to install the stay line (wire)

1, general light heating type of bath heater, there are 4 groups of wires, there are two groups of light heating, ventilation 1 group, lighting 1 group. By 5 wires, the top of the top is 1 zero line 4 control fire wire, the following switch is 1 into the fire wire, 4 control out of the fire wire.

2. wind-heated bath (PTC ceramic heating pad heating) requires 5 groups of wires, 1 group of lighting, 1 group of ventilation, PTC heating pad 2 groups, the inner cycle of the blower anion 1 group.

How to install a bath fan out of the air

Ventilation fan needs an air outlet in order to suck out the indoor air. The diameter of the air outlet is usually 10CM, usually to be opened before the ceiling.

How to install the bath bar installation port reservation

General bath bar opening for 300300, there are bath bar opening for 300400 or so. According to the requirements and methods of different panels on the reserved installation port there are some differences:

1.300300 or 300600 aluminum snapback ceiling: leave a piece of 300300 snapback position is not installed can be.

2. Aluminum strips, it is best to confirm the size of the opening of the bath bar when installing the buckle plate, in the installation of the buckle plate when the installation of holes, in the hanging on the preparation of two greater than the span of the ceiling main keel of the stronger wooden bars, do install the bath bar with.

3. Plastic steel buckle plate, and the above roughly the same.

4. Waterproof gypsum board ceiling and sauna board ceiling, to confirm the location of the keel, please also determine when installing the buckle board bath installation hole size reserved.

Bath heater installation precautions

1. First determine the bath, the person in the bathroom standing position, the person should be facing the shower head (shower nozzle), the back of the human body above the back is the installation of the location of the bath heater.

2. The reason why the bath is installed in the back of the human body above the back, in addition to the heat of the bath can heat the air in the bathroom in addition to more direct heat radiation to the back of the human body. Because when bathing, people feel the coldest is the back. Be careful not to install the bath bomb in the top of the head.

3. The above position is to human standing shower as an example, if you use the bathtub, the bathtub as the center of the installation of the bathtub. Bathroom area is large, with the bathtub lighting, there can be another lighting.

The above is to bring you how to install the bath bar and related notes, after reading is not more understanding in this regard? I hope the above can help you, if you want to know other related information, please continue to pay attention to us, more exciting stay tuned.