How to burn kang?

1, the first step of burning kang is very important. Make sure that the kang you want to burn has an induced draft fan, because the newly lit stove will smoke, and having an induced draft fan will greatly alleviate the smoking problem. First, it is safe, and second, it will not cause embarrassing situations such as cough.

2. After the ventilation check, you can prepare to burn the kang. The process of burning kang is actually very simple. First, you should prepare firewood of different lengths. At the beginning, it is best to use some short thin boards or twigs. In short, it is easy to ignite. Of course, choose dry firewood, because wet or snowy firewood will smoke, so be sure to pay attention.

3. Generally, waste paper can be used for ignition. Of course, some places have better environment. For example, I will have some oiled paper here now. For example, it is easy to ignite. After the ignition, cover the fire with some short firewood to ensure that the fire burns, so that it will not go out. Don't cover it too tightly to prevent pressure fire extinguishing.

4. After the fire is lit, don't rush to fill the coal and let the fire flourish. This can meet the conditions of burning coal. Before the fire is booming, fill some firewood, add five or six small coal blocks to the firewood, and add some small coal blocks after about ten to fifteen minutes to ensure the fire of the stove is booming.

When the furnace is completely red, you can increase the lump coal, and you can add coal again in about half an hour.