How much is a woodworking engraving machine?

Woodworking engraving machine is a common equipment of engraving machine. Woodworking engraving machines are used in woodworking operations, mainly including mechanical engraving machines, plasma engraving machines and laser engraving machines. Their working principles are similar, and their prices range from 25,000 yuan to 6,543,800 yuan. Woodworking engraving machine needs professional training to operate. Here is a simple self-study tutorial for everyone, including editing and typesetting and carving on the computer. Let's have a look! 1. How much is a woodworking engraving machine?

The price of woodworking engraving machine is related to the type. Woodworking engraving machines can be roughly divided into three categories: mechanical engraving machines (or empty engraving machines), plasma engraving machines and laser engraving machines. Their working principles are basically the same, with slightly different components and different uses.

1. The mechanical engraving machine (or numerical control engraving machine) uses numerical control technology to control the cutter to move in three or four axes for engraving. Based on the standard model, the price is about 25,000 to 6,543,800+yuan (except for special shaped machines).

2. Plasma cutting machine is a processing method that partially melts (and evaporates) the metal by raising the gas to a high temperature state, and removes the molten metal by the momentum of high-speed plasma to form a cut. Prices range from 3 to 10 based on standard models.

3, laser engraving machine, according to the different power and configuration, the price is different. The average machine is more than 30 thousand If you want to buy good quality, you should choose the more expensive one, about 40 thousand.

Second, the introduction of self-study course of woodworking engraving machine

1, editing and typesetting

Typesetting according to customer requirements and design requirements. After calculating the path correctly, save the paths of different tools, save them as different files, and edit them.

After checking that the path is correct, open the path file in the engraving machine control system.

Fix the material, define the origin of the workpiece, turn on the spindle motor and adjust the value correctly.

Connect the power supply to operate the machine.

2, boot

When the power switch is turned on, the power indicator lights up, and the machine performs reset self-check operation first, and the X, Y and Z axes return to zero, and then run to the initial standby position (the initial origin of the machine) respectively.

Use the hand-held controller to adjust the X, Y and Z axes respectively and aim at the starting point (machining origin) of engraving work. The rotational speed and feed speed of the spindle are properly selected to make the engraving machine in a waiting state.

Step 3 carve

For the file to be carved, open the transmission file and transmit the file to the engraving machine, and then the engraving work of the file can be automatically completed.

Step 4 end

After the engraving file is completed, the engraving machine will automatically lift the knife and run above the working starting point.

The above is a brief introduction to the teaching of woodworking engraving machine, reminding untrained employees not to use the engraving machine at will.