How to wrap the sweat absorption belt?

Winding method of sweat absorption belt

Step one? Press the thin end (starting end) of the sweat-absorbing belt on the bottom cover side of the racket handle. Generally, a double-sided adhesive tape will be attached to the beginning of the sweat absorption belt. Fix the end of the sweat absorption belt on the end of the handle.

Step two? Hold the handle with the fingers of the left hand and make it rotate clockwise (just keep the LOGO positive), and at the same time, control the direction of the sweat absorption belt with the right hand to align the sweat absorption belt. The edges of the sweat-absorbent belt can overlap each other, and the amount of overlap depends on personal preference, generally 2 mm During the winding process, the sweat-absorbent belt should be tightened properly, otherwise it may spread out during the hitting.

Step three? Wind the absorbent tape to the end according to the above method. At this point, cut off the excess absorption band and trim the edge of the absorption band if necessary.

Step four? Prepare the pasted tape (that is, the small tape I just said not to throw away), and wrap the end of the sweat-absorbing tape with tape until it does not spread.

note:

1. The viscosity, chirality and sweat absorption of the sweat absorption belt are the best at first, and it will become more and more slippery with the increase of use time.

2. Finally, I would like to remind you that from a health point of view, bacteria will increase with the increase of use time. In order to ensure the feel and hygiene of hitting the ball, please change the sweat absorption belt regularly. The suggestion is to play the ball five times and change it at least once.