How to assemble goldfish kites

Goldfish kite is a beautiful traditional kite. The following are the assembly steps:

Materials:

1. Components of a goldfish kite: including goldfish body, fins, tail, scroll, connector, thread, etc.

2. Kite string: Choose the appropriate length. It is generally recommended to choose a line of about 50- 100 meters.

Steps:

1. Take out the body, fins, tail and connector of the goldfish and assemble them into the shape of a goldfish. It usually takes some patience and skill to assemble it correctly.

2. Confirm the direction of the goldfish's head and fix the scroll on the goldfish's head.

3. Thread the thread through the thread wheel, tie one end of the thread to the connector of the goldfish, and pull the other end straight to the ground.

4. Gently pull the wire to ensure that the goldfish's body and fins can be unfolded naturally, and at the same time adjust the position of the reel to ensure that the reel can rotate.

5. If the goldfish needs to be adjusted, it can be achieved by moving the connector or adjusting the position of the fin and tail.

6. Wait for the wind. When the wind blows the goldfish, pay off the line slowly, and at the same time control the rotation of the control wheel by hand to maintain the balance and stability of the goldfish.

7. When the goldfish needs to be taken back, slowly rewind the thread until the goldfish gets it.

The above are the assembly and flight steps of the goldfish kite. Have a nice trip and enjoy your kite.