How to adjust the fishing lead skin

(1) First of all, the lead skin should be tightly wrapped on the lead skin seat and as neat as possible. Every time you change bleaching, you should put on a matching lead skin instead of a small lead block in the middle. Buy a small box that can be divided into several parts, and mark the lead skin on each box to match the float for the next use and preservation.

(2) The beginning of wire cutting is to insert the floats together. After falling into the water, pay attention to the speed at which the float turns and sinks. If it is fast, it is necessary to cut more lead skin to adjust it. If it is slow, it is necessary to cut less.

When the drift turns slowly, the drift adjustment is close to the eye adjustment. If you want to adjust five eyes, this pair of scissors can only cut lead in five eyes at most. If it is not enough, cut the lead with five eyes until one or two eyes are exposed, hang the parting line, and make 45-degree slope correction at two corners, which can reduce the error.