Conveyor belt joint bonding have which kinds of methods?

There are three main jointing methods for conveyor belts:

One, belt buckle joints, is the use of nail buckle machine will be nailed to both ends of the belt machine joints, and then the belt joints will be connected to the joint parts of a traditional mechanical joints. Joint operation is convenient, but the joint damage to the belt itself, and the use of time off, it is easy to secondary cracking phenomenon occurs. The current use rate has been increasingly low.

Two, cold vulcanization joints, is the use of cold vulcanization joints glue, such as commonly used two-component sk313 will RIT belt repair strip laminating in the belt joints to do the sealing of the new type of cold bonding head way. Easy to operate, strong adhesive force, does not require large-scale equipment, does not require a lot of manpower and material resources, usually used for canvas nylon and other low-strength layered belt joint processing.

Three, hot vulcanized joints, is the use of hot vulcanized slurry with RIT unvulcanized core rubber, unvulcanized surface rubber in the vulcanizing machine under pressure, the belt joints parts of the pressure together with the more commonly used joints. The jointing operation is relatively more complicated, but the joints have a strong bonding force and are suitable for belt joints of various materials. Especially for wire rope conveyor belts and PVG/PVC whole core belts with high tension or special belt joints.