How to put ink in a pen and how to use it.

1, first insert the ink absorber into the pen body.

2. Push the push-pull device to the bottom to exhaust air.

3. Dip the pen tip into the ink, and then pull the push-pull device upward to extract the ink.

Extended data

Use and maintenance of pens

1, general cleaning can repeatedly absorb water and drain water until the discharged water is clean, and then dry it. If you don't clean the pen for a long time, or plan to seal it after cleaning, you need to disassemble all the parts and clean them separately.

2. After preliminary disassembly, it is divided into five parts: nib, converter (ink container/ink bag), pen holder, pen cap and pen holder. The latter two generally do not need cleaning. The metal parts of the nib and tongue (inking structure) should be further disassembled. The metal sheet of the nib should be washed clean with water, and the whole inking structure can be carefully brushed with an old toothbrush, and then soaked in warm water for one night.

3. Dry all parts after cleaning, and then package and seal them after being completely dried. Of course, different pens have different structures, and not all pens can be disassembled. For pens that are difficult to disassemble, only the first method can be used to clean them. Don't disassemble and damage the pen by force.

4. Finally, special attention should be paid to: Never clean the pen with boiling water or overheated water, otherwise it will do harm to the pen. And don't let water touch the pen tip, otherwise it may make the pen lighter or unable to write.