How to install the integrated socket of the refrigerator and wine cabinet

1. First, be sure to turn off the main switch. Secondly, the garbage in the wire box should be cleaned before installation.

2. Next, pull out the bottom box wire, leaving it to five to eight centimeters. Cut off all the excess. Be sure to use professional peeling pliers to peel off one centimeter. Open the logo on the plug-in board. L is the live wire, N is the neutral wire, and the ground wire in the middle is aligned with the red live wire, blue neutral wire, and yellow ground wire. Connect the wires and make sure every screw is tightened.

3. Then push the socket back after completing the connection. Use high-strength self-tapping screws to fix them firmly and not easily loosen. Do not use the screws provided by the merchant, as they can easily loosen.

4. Finally, use a level to correct the position. Do not skew it. If there are multiple sockets, make sure they are on the same horizontal line, and then install the panel.