Traditional Culture Encyclopedia - Traditional festivals - How to tie the double hook to the fishing rod

How to tie the double hook to the fishing rod

A line with two hooks, because it ties an extra hook to a line, increases the chance of fish biting the hook when fishing. As early as the thirties, when I was a child, I liked to follow my parents to rivers and streams.

Fishing. I remember one time my uncle went fishing in Shuitan River when we returned. When he lifted the pole, two big crucian carp were lifted out of the water at the same time, and they flew in a row.

Dancing and struggling, these childhood memories always come to mind.

In the traditional fishing group, it is customary to tie a hook at each end of a 40 cm long fishing line, which is folded into a distance of 5- 10 cm, above the long line.

At -5 cm, tie the sinker to the bus, and some tie the auxiliary hook to the main sinker to become a double hook usage.

Since fishing method, Taiwan Province Province, China, was introduced to Chinese mainland, the advantages of double hooks in Taiwan Province fishing group have been recognized and imitated by fishermen. When it is used for recreational fishing, it constantly

We have accumulated a lot of good experience in reform and innovation. So in recent years, many articles introducing the experience of double hook fishing have been published in relevant fishing magazines. Such as "double hook fishing method" and "double solution"

A hook easy winding method, a double hook knot method, etc. It shows that the majority of fishermen attach importance to the use of one-line double hooks and have explored many good experiences in practice.

In my fishing life for more than half a century, I feel that although there are many introductions of the experience of one-line double hook, some methods are complicated to make and difficult to popularize. The method of "adjustable double hook system method" is as follows:

It is important to tie the 8 cm long sub-wire and sub-wire to the bus, but it can still be moved by force. According to the above requirements, and after repeated tests, the actual effect is really bad.

. It is easy to tie the sub-line on the bus, but in practice, because the sub-line is tied tightly, when the line is pulled or lifted by the fish, it can be tied again under the pull of the fish and the resistance of the water.

The tight auxiliary hook line will also slide down, where the bus bar passes will be pulled, pressed, bent and deformed, which will damage the line, and the bent bus bar and sub-line will be easily entangled with each other. such as

The line of the auxiliary hook is a little loose (because the two lines are not dead knots), and the auxiliary hook is easy to slide down automatically when throwing the rod and lifting the line. In fact, the main hook of this "adjustable double hook system method" cannot be adjusted.

The movable and adjustable double hook is just an empty name.

After learning the failure experience and lessons of using single-line double hook, it also aroused my desire for innovation. How can we really become a convenient and easy adjustable double hook?

How to make the main and auxiliary hooks not only have a good holding power on the bus, but also move up and down a long distance, bottom fishing, floating fishing and deep fishing are convenient and fast, and you can use your strength.

If rubber particles move far and near, the bus bar will not be bent, deformed and damaged, and it is durable. After groping, I finally succeeded. Now this convenient, fast and effective adjustable

This paper briefly introduces the making and using methods of line double hook to fishermen.

Selection and preparation of materials

1. Choose a small piece of elastic and unaged automobile inner tube film (it is convenient and easy to ask the master for an abandoned film at the shoe repair booth) or find a piece of tape to let the children jump on the rubber band.

It is required to be flexible and not aging, otherwise the retention effect is not good:

2. Buy some 8- 12 fine embroidery needles for later use. The thinner the needle used, the better its retention performance when it is worn on colloidal particles.

3. The thickness of the mother-child line, the size of the hook and the collocation of drifting are all used according to the habits of fishing friends. For hand fishing, prepare a bus as long as the pole and use the same sub-line.

Line 1-2 can be done below. When adjusting the drift, the sinking force of the hook and the buoyancy of the drift are basically balanced, and the back of the main hook touches the bottom, so it is very sensitive to float a grain on the water.

Used for fishing, the hook rate is high.

Manufacturing and assembly

Making method: When making, use scissors at the edge of the film to cut out two long colloidal particles A and B, which are about 0.5 cm in size of mung beans. A colloidal particle is a fixed movable hook and B is a fixed hook.

Lead pendant with movable use position. But it can't be cut off, and a small connection point should be left for easy operation when assembling. After practice, colloidal particles cannot be replaced by space beans because their residence time is not as long as colloidal particles.

All right.

Assembly method: When assembling, use a fine needle to pass through one end of the bus bar, and then use a needle to pass through all the used loose floats one by one. Use the vertical float to pass through the float seat or insert the small ring of the valve core into the vertical float.

Use ". Then, after the needle passes through the long vertical direction of the movable rubber particle A and the needle thread is drawn out, the second movable rubber particle B is threaded on the bus again by the above method.

Take off the needle, then tie the main hook to the end of this thread, gently tie the sinker to the B rubber particle, and cut off the excess thread end.

After threading the needle on the 20-cm-long accessory brain thread, pass through the glue particle A with the same length on the bus, take out the needle and thread, and take off the flower needle. Then, put the end of the short rope on.

The long strands are tied together in the middle of the long rubber material, and the short strands are cut off. Finally, tie the auxiliary hook to the long end. The distance between the hook and the rubber particles is usually 3-5mm.

5 cm long, cut off the extra ends. In this way, even if the assembly work of this veritable one-line adjustable double hook fishing group is completed, it can also be stored for later use (pictured).

Application mode

1. If you use the main hook to catch bottom fish, use the familiar single hook fishing method. In addition, when fishing in an environment with a lot of silt and rotten grass at the bottom of the fishing point, the hook bait is buried in it.

The angler can move the B hook up in time (the plumb pendant also moves up at the same time) to increase the length of the main hook brain line, so that the hook bait is higher than the mud grass and the fish can see the hook.

The world is delicious, they will compete for food and bite, which has immediate effect and can catch more fish.

2. The auxiliary hook is mainly used for hanging fishing to catch pelagic fish. It has the characteristics of large range of activities; Can be adjusted from semi-water to floating downwards, and is used for fishing grass carp and silver carp.

Very convenient and effective; The bottom can be moved to the vicinity of the main hook, which is used to catch crucian carp and other fish that like to swim in the water for food. The effect is particularly good.

The specific method is: when using the secondary hook to fish, the fisherman pulls the main hook bus with his left hand, and gently touches the movable A colloidal particle with the secondary hook with his right thumb and fingers. If the water level needs to be deep,

The movable colloidal particles move in the drift direction until they reach the required distance. If you want to fish shallow, you can move the colloidal particle A to the main hook until it is straight. Explore in this way.

Look for the water level in the swimming layer of fish.

Use advantage

1. The fishing method of one line and two hooks with a hand pole fishing group can increase the chance of fish biting the hook by tying one more hook on one line first. Combine two hooks, one meat and one dish.

Fishing method allows you to throw fish in good places and catch a lot. Secondly, it is easy to know that it likes eating meat or vegetarian diet, so it is easy to use bait for fish. "The bait is right, the fish is full of baskets.

"For fishermen, it is especially important to fish in a strange environment.

2. In the waters with much silt and rotten grass, when the fish don't bite the hook, the movable B hook colloidal particles can be moved upward in time to increase the length of the main hook brain line. When the brain line is long, the bait will naturally show mud.

The defect that the bait is buried by sundries and is difficult to catch is avoided.

3, the adjustment range of the main hook and the auxiliary hook is large, and the bottom floating distance can be adjusted according to different situations of the fish; Looking for the swimming rules of fish, fishing grass carp and silver carp in the middle and upper layers.

Very convenient and effective.

4. Because the movable double hook assembled by colloidal particles is used for fishing, it not only has good retention, but also facilitates the main hook and the auxiliary hook to move up and down. You can move it at will.

The bus is not damaged. At the same time, it is also suspended bottom fishing, deep fishing and shallow fishing. The water level can be adjusted according to the situation of the fish, and the fishing effect is quite good. After years of application practice, it not only

Can make fishermen use it handy, but also effectively catch grass carp, crucian carp and other fish.

If the penetrating colloidal particles have poor retention, one more particle can be penetrated under the colloidal particles to increase their retention. In addition, the auxiliary hook is used for a long time to catch big fish or fishing groups, and the colloidal particles automatically slide down.

When shifting, the fisherman can conveniently move the bait back to the original position when loading the bait, so as to use it as usual. Fishing friends who like double hook fishing, if you use different double hook methods and the fishing effect is not good, don't.

Let's give it a try and see whose method is simpler and easier to use.