Correct binding method to solve the lead drop of sea pole

The graphic steps of the correct binding method of the sea pole lead pendant are as follows:

Preparation materials: fishing line, lead pendant.

1. First, fold the fishing line to tie the lead weight in half.

2. Then fold the fishing line in half. The fishing line folded in half for the first time passes through the fishing line folded in half for the second time.

3. Next, pull both ends of the fishing line and tighten the fishing line.

Then put the end of the fishing line into the lead pendant.

5. Next, put one end of the bundle on the lead pendant.

6. Then tighten the fishing line to tie the lead pendant.

How many grams of lead is the best?

It is best to use 50- 100g lead weights for sea poles. The weight of lead sinker depends on many factors, besides the amount of lead eaten by floating objects, it is also related to the length of fishing rod and water environment. Generally, the longer the fishing rod, the greater the weight of lead used. The lead pendant for still water can be lighter, and if the river flows, use a large lead pendant.

The main function of the lead pendant is to form a certain balance with the float, so as to control the position of the bait and catch fish in the appropriate water layer. In addition to daily use, the maintenance of sea poles is particularly important. The maintenance method is simple. If the sea pole has a back cover, you need to open the back cover, and then pull out all the sea poles, but don't use too much force and put them in a ventilated place to dry.

If the sea pole has no back cover, three quarters of each section can be taken out and put in a ventilated place, and the drying time may be longer. For rainy weather or high humidity, you can take out half of each section and put it flat on the electric mattress for heating, which will also make the water evaporate quickly.