What is the dragon dance made of?

Dragon dance materials include: iron sheet (or plastic sheeting), iron wire, wooden board, bamboo pole or wooden stick (swinging with rattan stick is better), thick cotton rope and other materials.

Dragon Dance Road has a dragon ball, dragon head, dragon body (including skeleton and dragon clothes), dragon tail and dragon flag, gongs, drums and cymbals.

Zhalong's works must be designed, selected, bound, pasted, painted and decorated separately.

Dragon making

1, the production of dragon balls

1) The iron sheet (or plastic sheet) with a width of 1cm is 75.36cm, and it is circled into an iron ring with a diameter of 24cm.

2) Punch holes at both ends of an iron ring with a diameter, pass thick iron wires through the holes, and add small tubes with a length of 2 cm at both ends.

3) Bend the thick iron wire passing through the hoop downward into a semicircle with a diameter of 30cm, and fix the rest on a bamboo (wood) stick with a length of 105cm, and draw on the bamboo (wood) stick.

4) Tie four or six bamboo strips with a width of 1 cm and a thickness of about 0. 1 cm to the iron ring; Form a bamboo circle, and the distance between the circle and the country should be equal to make it a ball. Cut the red cloth into arc-shaped pieces and stick it on the dragon ball skeleton with resin to make red balls.

5) Hang ribbons on both sides of the Dragon Ball (various ways can be designed), and it is finished. It can also be made with modern spherical plastic, which is faster and more convenient.

2, the production of faucet

1) Cut a circular hole with a diameter of about 3 cm in the middle of two wooden boards with a length of 30 cm, a width of 9 cm and a thickness of 1 cm (one of them cannot penetrate);

2) Take two boards with a length of 8cm, a width of 9cm and a thickness of 1cm, and nail the four boards into a rectangle. Then put a bamboo pole or stick with a length of 105cm and a diameter of 3cm through the board below (it is best to shake it with rattan) and fix it with resin, iron wire and nails (it must be tied tightly, because the faucet is easy to loosen due to a large amount of activity).

Use a plastic net with a thickness of 0. 5cm, 30cm long and 94.2cm wide, enclose and fix the rectangular wooden board (the iron wire can be fastened).

3) Tie a bamboo stick with a width of 0. 5cm passes through the plastic net and is bent into the front center of the cylinder, and the protruding height is about 20cm, and the back end of the bamboo stick is tilted backwards, and the back center of the plastic net is tied with fine iron wire and resin and bent into the cylinder; Take two bamboo sticks and tie them on both sides. Tie a thin bamboo stick and a thin iron wire horizontally into a head shape, and then cover it with a plastic net.

4) Dragon horn (as shown in the figure) can be made of thick iron wire and crossed on the faucet; The dragon's nose is tied with thin wire to the height of 10 cm, and a long wire is left on each side to think it is a rolled dragon beard.

5) Tie two dragon ears with iron wire or plastic net, tie them on both sides of the faucet, paint them (depending on the golden dragon, green dragon and fire dragon), and decorate the pattern with gold and silver paint.

6) Stick white cloth on the faucet skeleton and color it (depending on the color of golden dragon, green dragon and fire dragon), and decorate the pattern with gold and silver paint. The mouth is painted with red water lines, and the dragon horn and the faucet are different colors.

7) Cut a small plastic ball with a diameter of 5 cm into two halves, paint it black as a dragon's eye (or use a flashlight), cut the white cloth into an eye socket larger than the eye), cut the eyebrows with a red cloth, and cut the nostrils with a black cloth.

8) Cut the dragon teeth (upper and lower four fangs, upper and lower two rows of incisors, painted white, as shown in the figure) and corrugated paper 35cm long and12cm wide into tongues (painted red), and put them in Longkou respectively.

9) Use multiple red plastic ropes with a length of 50 cm, fold them in half and tie them on an iron wire, and then brush them off with an iron brush.

When it becomes a filament, it is regarded as a dragon beard, and finally it is tied to the dragon's chin. ? Finally, spray it all with transparent spray paint.

3, the production of the dragon body

1) Cut a circular hole with a diameter of about 3 cm in the middle of two wooden boards with a length of 30 cm, a width of 9 cm and a thickness of 1 cm (one of them should not penetrate), take two wooden boards with a length of 8 cm, a width of 9 cm and a thickness of 1 cm, nail four wooden boards into rectangles, and then make them into lengths with rattan.

2) Use a plastic net with a thickness of 0. 5cm, 30cm long and 94.2cm wide, enclose and fix the rectangular wooden board (it can be fastened with iron wire). Wrap both ends of the plastic tube with adhesive tape to prevent the protruding part from cutting the dragon clothes.

3) The diameter of bamboo (rattan) ring is 30 cm, with * * * 80 (standby).

4) Bamboo rings are 30 cm apart (6 in each section), connected by 4 nylon ropes, tied to plastic rings and fixed.

5) Prepare two thick cotton ropes, each 30m long, which respectively pass through the upper and lower ends of the dragon body bracket and are fixed as dragon ribs.

4, the production of dragon clothes

1) Use a piece of self-made cloth, which is one meter wide and twenty-two meters long. The width of the cloth is one centimeter on each side, and a piece of cloth (about fifteen centimeters long) is sewn every thirty centimeters on both sides to fix the dragon clothes.

2) Cut the red cloth (velvet) into triangles and sew Jackie Chan's back.

3) Draw Long Lin (or rubber seal with carved dragon scales and stamped with ink) and belly lines (draw a red line with a width of one centimeter every five centimeters) on the dragon clothes.

4) Round sequins can also be sewn on the dragon suit to increase the luster and shine in the sun.

5, the production of the dragon tail

1) Use two wooden boards with a length of 30cm, a width of 9cm and a thickness of 1cm, drill a circular hole with a diameter of about 3cm in the middle of each wooden board (one of them should not penetrate), take two wooden boards with a length of 8cm, a width of 9cm and a thickness of 1cm, nail the four wooden boards into a rectangle, and then throw the long/kloc.

2) Use a plastic net with a thickness of 0. 5cm, 30cm long and 94.2cm wide, enclose and fix the rectangular wooden board (it can be fastened with iron wire).

3) Tie a bamboo branch with a width of 0. 8 cm in a circle with a diameter of 23 cm, tied to the central side of the board. Take another bamboo branch with the same length 150 cm, tie it into a tail shape along the circle above and fix it on the central side of the board.

4) Tie eight thin bamboos with different lengths to the tail, then wrap fourteen bamboo pieces (or plastic nets) with different sizes, and tie them into a tail shape in turn, which is really fixed with resin and thin iron wire, and the tail end is rolled on the right.

5) Tie a triangular dragon ridge with iron wire (or plastic net) and paste it with red cloth. Paste the beaten tail with white cloth and color it, and then draw scales (the closer to the beaten tail, the smaller the long forest), and it is finished.