How does ug draw the same outline as the parts?

In CAD design software, the creation of drawing geometry with the same outline as the part can be completed by the following steps:

1. Import part files: import part files with the same contour into CAD software. This can be done by importing the function of the part file or dragging and dropping the file on the software interface.

2. Profile selection: Use the software selection tool to select the profile of the part. This can be a boundary line, curve, contour line, etc. Part of.

3. Adjustment selection set: After selecting the part outline, some adjustments are needed to ensure the correct selection of the required geometric information. This can include adding or deleting selected boundary lines, smoothing curves, etc.

4. Create extruded geometry: Use stretching or stretching operation to create geometry with the same shape as the selected profile. In CAD software, the specific pull-out operation will vary from software to software, but it can be found in the pull-out or expansion options.

5. Specify the pull-out distance or height: specify the pull-out distance or height during the pull-out operation. According to the need, you can input specific values in CAD software or make interactive adjustment with the mouse.

6. Verification result: After pulling out, verify whether the created geometry is the same as the outline of the part. Through observation and measurement, the size, shape and relative position of the drawn geometric figure and the outline of the part are ensured to meet the expectations. UG is a three-dimensional computer-aided design, computer-aided manufacturing and computer-aided engineering software developed by Siemens Digital Industrial Software Company. This is a powerful and comprehensive engineering design and manufacturing solution.