How to transform it into a heating stove burning natural gas?

Choose a suitable location, install a gas heating stove (the location and installation of the gas company are required), lay gas pipelines, and transform the original heating pipelines:

Remove the original heating stove and clean the radiator and the old heating return pipe you want to keep; According to the location of the gas wall-hung boiler, connect the water supply and drainage pipes of all radiators-all connected to the water supply and drainage pipes of the wall-hung boiler. It is recommended to use PPR hot water pipe for construction, and the original galvanized pipe is also recommended to be replaced.

Suggestion: It is very convenient to reserve a faucet at the lowest point in return pipe to clean the pipeline and use it under reduced pressure.

Extended data:

After the heating boiler is electrified, the control system begins to detect the water level and shell temperature of the boiler. If the test is normal, the boiler starts to start the burner to heat the water. When the water temperature reaches the set temperature, the burner stops heating.

At the same time, when the water temperature of the boiler reaches the pump-on temperature (the pump-on temperature can be set freely), the boiler starts the hot water circulating pump, and the hot water circulates in the heating pipeline system, and dissipates heat through radiators (such as radiators, fan coil water heating air conditioners, central air conditioning units, etc.) to achieve the purpose of heating. ).

Heating furnaces can be divided into electric heating boilers, oil-fired heating boilers, gas-fired heating boilers and coal-fired heating boilers according to different fuels. According to whether the boiler is under pressure, it can be divided into atmospheric heating boiler and pressure heating boiler.