Complete works of homemade toys for primary school students

Pupils make their own toys as follows:

The first frame: materials: mineral water bottle, colored cardboard, scissors, watercolor pen, transparent glue.

1. The lower part of the water bottle is wrapped with cut white cardboard.

2. Use blue cardboard to make wings and jet barrels of airplanes.

3. The propeller made of light blue cardboard is fixed under the beverage bottle cap, and the remaining cardboard is cut into blue dots and stuck in the aircraft cabin as decoration.

It takes about a quarter of an hour to make the whole plane under the guidance of the teacher. If children like it, they can draw more patterns with watercolor pens or write in the airplane cabin.

The manufacturing method of rattle is as follows:

Materials: compass, pen, cardboard, beads, rope, scissors.

1. Prepare a piece of cardboard, two identical beads and two ropes with the same length. Beads can also be replaced by other things, such as jade particles. )

2. Draw a circle on the cardboard with compasses or two pens, and then cut the circle along the edge of the picture with scissors.

3. Use a punching machine or other things, such as scissors, to punch two holes at the symmetrical ends of the cardboard.

4. Take a small wooden stick, choose a soft wooden stick, and cut a small slit with a knife at the top of the wooden stick to facilitate tea ceremony paper.

5. Insert a stick between the two holes on the left. If it is not firm, it can be fixed with rope or other things.

6. Tie two beads to both ends of the cardboard with a rope, paying attention to the same length. A simple rattle is made.