How to install wood pyrography

Because the color of the board and the burning color of the burn marks are warm colors, it is generally appropriate to choose elegant bean cyan with silk edges. Stick the installed wooden board on the wooden frame with latex, flatten it around to prevent it from loosening, and then add a rosewood log frame around the frame. In the choice of picture frame, it should be determined according to the style, form and content of the work, regardless of the style, theme and content of the work, it should be mounted, which will not only add color to the work, but will destroy the artistic effect of the work. You can also decorate according to your hobbies and work style.

In order to increase the woody effect of the board, you can use the board as a border. The colors of wood are deep and light, such as red, brown, yellow and white. The matching of painting core and border can be solved by contrast methods such as depth, red and white. Painting with white basswood plywood, dark Philippine boards and Fraxinus mandshurica boards can be used as painting edges, and basswood boards in dark boards are whiter.

Wood hot stamping adopts the traditional mounting method, using wallpaper instead of silk, which is as effective, labor-saving, economical and not afraid of ash erosion as silk. When it is old, you can gently scrub it with a towel dipped in soapy water, which can make the wallpaper as new. If you paint varnish, you can keep it clean. Phenolic varnish is more suitable for paint department. If you need to draw for hot stamping, you should intentionally deepen a layer of chroma when ironing. After painting, the ideal tone will be restored. Hot stamping without paint can be further modified, and hot stamping with varnish cannot be modified.

Unpainted boards are easy to repair when they are old: the silk edges can be reinstalled. The dust in the painting core can be rubbed back and forth on the picture with dough, and the dust sticks to the dough. If there is a particularly dirty place, you can hit your friend with fine sandpaper and bake it again with a soldering iron.