Handmade wooden crossbow tutorial video

The manufacturing method of manual wooden crossbow is as follows:

Tools/materials: chopsticks, art knife, 502 glue, ruler, saw blade, wooden clip, rubber band, hot melt glue gun, etc.

1. Let's make a part of the main arrow trajectory first. We will remove the upper part of chopsticks and make a groove.

2. For the prepared rubber bands and clotheshorse clips, install them as shown in the figure first, tie the six clips with rubber bands in groups of three, and then bite them together one by one.

3. Then four additional clips are needed, which are arranged in the front half of the bow in a prism way.

4. Then, we made several pieces and glued them with 502 glue, just for the sound of arrows.

5. Two pieces are used here, the lower piece, so it is necessary to carve a groove and then make the movement track of the bowstring. According to the actual situation of the length tool, be careful not to post it backwards.

6. After the production is completed, the arrow body needs to be made of two small pieces of material, and two pieces of bamboo are bonded together.

7. After completing the above steps, it is basically done.

8. Then we can start making the launcher. We stick the arrow box and the launching slot together, and then when we put the upper bowstring through the slot, we can also put it in and stick it again.

9. Then, when we have finished all the crossbow strings and other accessories, we can finish the production.