Traditional Culture Encyclopedia - Traditional festivals - Why doesn't the automatic kettle automatically add water? -How to adjust the filling time of the kettle

Why doesn't the automatic kettle automatically add water? -How to adjust the filling time of the kettle

Now the kettle can be plugged in to boil hot water, which is more convenient and energy-saving than directly using the stove to boil water, and it burns quickly. Now there is a fully automatic kettle, which can automatically add water for heating, which is very convenient and intelligent. So what happens if the automatic kettle doesn't automatically add water?

Why doesn't the automatic kettle automatically add water?

1. The pump may be broken. First, check whether the water pump motor rotates. If not, check whether the water pump motor is damaged.

2. There may be air in the water inlet pipe. Check whether there is air, and there should be no problem with exhaust.

It may be caused by improper use. Put the electric kettle on the thermostat, and then double-click to pump water.

4. The circuit board is broken. Press other function keys to see if there is any response. If there is no response, it means damage, and you can find after-sales maintenance.

How to adjust the filling time of kettle?

After selecting the water supply time, use the+and-keys to adjust. Press and hold the manual water adding key 1.5 seconds and the automatic boiling key 1.5 seconds, the time can be set between 20 and 50 seconds, and then press the power key within 3 seconds to set successfully. The boiling time of the automatic water adding kettle cannot be adjusted. Automatic kettle adopts intelligent machine instructions and has its own induction system. When the temperature in the water reaches 100 degrees Celsius, it will automatically stop heating. Standby means that when the water temperature in the kettle is lower than 50 degrees, it will automatically heat up.

How often does the kettle scale clean up?

It is recommended to clean once a week. The longer the time, the thicker the scale. The simplest and safest way is to be jealous. Pour half a catty of vinegar into the kettle and soak it. After 2 hours, observe the scale in the kettle. If the scale dissolves, it can be washed off with water. Or put a proper amount of soda water in the kettle, fill it with water and heat it on the fire. /kloc-after 0/0 minutes, pour in soda water, and gently brush the scale in the pot with a brush. You can also put three or four washed potatoes in the pot and cook for three or four hours. Maybe the result will surprise you.