Selection of fishing rod

What kind of pole is a good pole? How to choose a better pole from the same kind and the same price?

Firstly, four concepts are introduced, namely:

1: The taper of the fishing rod determines the tonality.

2. The thickness of the rod wall determines the strength.

The diameter of fishing rod determines the hardness.

4. Different materials have great influence on the above three points.

Walking is boring, try to make it clear in vernacular.

1: Tonality: When a pole is in a fish, that section begins to bend. That is what people usually say: 28 tones, 37 tones and so on. The professional name of the manufacturer is "first adjustment"-that is, the main stress point is near the pole tip, "this adjustment"-that is, the main stress point is on the pole body, and "trunk adjustment"-that is, the main stress point of the hand is close to the handle. The key to affect the tonality is the taper of the whole fishing rod, that is, the angle difference between the guide diameter (the diameter of the fishing rod tip) and the guide diameter (the diameter of the last section of the fishing rod). The greater the taper, the smaller the taper in front of the middle fish and behind the middle fish. You will have a deep understanding of the taper by referring to the tradition and dining table fishing rod. Then it's clear at a glance that we should choose fishing rods. Small fish should be tuned first, medium fish should be tuned this way, big fish should be tuned with trunk, and the bigger one should lean against the handlebar.

2. Strength: Whether the fishing rod is strong or not and whether it will break frequently directly determines the life of the fishing rod. However, the strength of fishing rod is not necessarily related to the hardness of fishing rod, which is often confused by fishermen. It is inevitably related to the wall thickness of fishing rod, the nature and material of fishing tackle, and the main influence is the wall thickness of fishing rod. Why is the competitive pole for fishing in Taiwan Province, especially in Taiwan Province so long? Obviously, the storage of long-section poles is never as convenient as that of short-section poles. Why should manufacturers foster strengths and avoid weaknesses? One of the fundamental reasons is to reduce the number of joints, strengthen the thickness of existing joints and avoid the phenomenon of broken rods. Tonality has an important influence on the strength, and it is obvious to compare the first tone and the main tone. Adjust the fish first and then adjust it. The stress point is in the front. The fish faces the tip of the pole or the first three sections of the pole, while the trunk adjustment means that the whole pole carries the strength of the fish. The first tone is a part of participation, and the main tone is all involved in confrontation. The result is self-evident.

3. Hardness: In a conversation with an old fisherman a few years ago, an old friend gave a vivid example: compared with steel bars with the same weight and length, steel bars are not easy to bend but easy to break, and steel bars are easy to bend but not easy to break. For the time being, we ignore the influence of materials on hardness, which can be understood as the diameter of fishing rod determines its hardness.

4. Material: There are three confusing things in the fishing rod, namely: strength-hardness-waist strength. Don't be misled by the word "waist" in waist strength. The waist force in the fishing rod does not refer to the strength of each section in the middle of the fishing rod, but refers to the rebound force when the fishing rod is forced to return to its original state after bending. The main factor that determines waist strength is material. There are four kinds of poles on the market now: carbon, resin, glass fiber reinforced plastic and mixed materials. The main fashion is carbon rods. I have visited the former Chongqing Golden Boy Fishing Rod Factory (now closed down). Simply put, carbon rods are rolled out with carbon fiber cloth, and carbon fiber cloth is divided into good and bad according to tonnage. The higher the tonnage of carbon fiber cloth, the more expensive it is and the cheaper it is. Empty talk, our country can't produce high-tonnage carbon fiber cloth yet, and now it depends on imports, so poles in Japan, South Korea and the United States are expensive. The underdevelopment of national science and technology has also affected our fishermen. Off topic, forgive me, let's get back to the point. The greater the elasticity of the material itself, the more prominent the waist strength will be. Many fishing friends are dissatisfied with their poles, lack of waist strength and no feel. The root cause is material poverty. Fishermen don't need to study carbon, a chemical thing, and neither can we. The most fundamental source of material security is your relationship with the owner of fishing gear shop. For the right fishing rod, you should check it online in advance or talk to fishing friends. If you make friends with the fishing gear boss, he won't hack you, and he won't dare hack you.

The strength, hardness, taper, material and waist strength of fishing rod do not exist singly, they are mutual. For example, waist strength has a certain relationship with the hardness of the fishing rod itself. After all, the harder the rod is, the greater the force will be after bending. On the other hand, the influence of hardness on waist strength is not linear. The harder the pole, the greater the waist strength. Another example is a particularly hard fishing rod, so hard that it can't bend at all, then its waist strength is equal to zero, which is what people call "no waist strength without bending." Another example is the influence of taper on the performance of fishing rod. Don't be too rigid about these questions. Many factors determine the quality of fishing rod. This article does not involve the length, weight, brand and price of poles, but everyone's preference. The reason why this article is written like this is mainly because things here and there are really a little difficult to explain. The most important thing for a fisherman is to communicate, refine and exchange ideas. The above is only a personal opinion, please forgive me if it is misleading.