Insole embroidery

1. Thread the thread through the hole in the lower left corner of the lattice to be embroidered.

2. Insert the needle into the oblique hole, and at the same time, insert the needle out of the hole on the left side in the horizontal direction.

3. In the same way as in 2, simultaneously thread the needle into the oblique hole and out of the horizontal hole.

4. Repeat the process of 1 2 and embroider it into a cross shape from top to bottom. In the state of 3, it passes through the hole in the lower right corner of the diagonal direction and then passes through the hole on the left side of the horizontal direction.

5. Thread the line into the hole in the lower right corner in the diagonal direction again, and then through the hole in the left direction.

6. If you go back to the starting point, you can complete all the cross figures.

7. The lines on the back will be arranged parallel to each other. Don't tie a knot. Just thread the line through three or four parallel lines.

8. Cut off the extra thread and tie a knot like this. No matter how you wash it, the thread will not come loose.