Illustration pictures of dining table-how to do illustration well?

Find a series of hand-painted illustrations called Dodolog flower arrangement Coco series

You can also go to Dodolog's bar, where there are many pictures and watercolor classes. .

Illustration tip 1. Do you have some tips on flower arrangement to share?

Ten things about tea should be shared with common sense of flower arrangement: 1, cut at the bottom of the flower stem at a 45-degree oblique angle of about 1 inch.

This will immediately increase the water intake on the stem surface, and the flowers and leaves of flowers will absorb more water and become fuller and more vigorous. 2. Choose a cup you like as a vase.

Don't cut off the stems completely, keep them in a proper size in a teacup, and tie them into a bunch with a rubber band, so that the flowers will be more complete and easier to change water. 3. If you want the budding flowers to bloom immediately, you can alternate warm water with hot water.

Cut off the stems first, and then put the flowers in a glass bottle filled with warm water. After one minute, move the flowers to a vase filled with cold water. After 20 minutes, these flowers will open their biggest mouths.

The mixture of vodka and sugar can prolong the flowering period. Adding a few drops of vodka and a teaspoon of sugar to the vase can delay the flower withering.

When the flower is sad, add a glass of vodka to the water, and its stem will straighten again in about a day or two. 5. Show succulents in beautiful dessert cups.

The lovely succulent plants in the dessert cup feel sweet and unique! Just fill the potted soil, then spray the soil with a spray bottle filled with tap water and put succulents on the wet soil surface. Over time, it will begin to take root and sprout. Be sure to spray the soil evenly once a week with a spray bottle until the top soil looks wet.

2. What is the common sense of painting and how to master it?

The art of painting common sense usually refers to the art of painting, sculpture, arts and crafts, architectural art and so on, which is carried out in space, expressed and appealed to human vision.

When this name was first used in Europe in the 17th century, it generally referred to painting, sculpture, literature, music and other things with aesthetic significance. When I began to use this word in general around the May 4th Movement, it also had the meaning equivalent to the whole art. ..

For example, when Lu Xun explained the word "art" in 19 13, he wrote: "Art is a word translated from English love. People who love clouds are originally from Greece, and their friendship is art.

Soon after, China translated the word "love" with the word "art", and the word "art" became the name specifically referring to visual arts such as painting. Skills and means of creating artistic images in plastic arts.

Such as painting with the help of color, light and shade, lines, anatomy and perspective; Sculpture depends on volume and structure. These techniques and means, through long-term artistic practice, have formed the unique and special artistic language of these plastic arts, which determines the different expression rules of these arts and is related to the success or failure of the plastic arts image and the appeal of artistic works.

The artist's constant exploration and improvement of the regularity of modeling expression means is a necessary condition for artistic creation to express new life content and meet people's developing aesthetic hobbies. The golden section is also called Huang Jinlv and the golden ratio.

On a line segment, the line segment is divided into long segments and short segments according to the optimal length-width ratio, or the optimal ratio of long sides to short sides of a rectangle is formed according to the optimal length-width ratio, that is, the golden section. Terms of two-dimensional painting.

Refers to the plane space composed of length (left and right) and height (up and down). In painting, in order to truly reproduce the image, we often use perspective, shading and other modeling methods to create the profound feeling and three-dimensional effect of the image on the plane of the second space, that is, to create the illusion of the three-dimensional space of natural objects with the second space.

Some paintings, such as decorative paintings and pattern paintings, do not require strong depth effect, but deliberately pursue the plane meaning of the second space in order to obtain artistic expression. Stereographic terminology.

Refers to the three-dimensional space composed of length (left and right), height (up and down) and depth (depth). In painting, in order to truly reproduce the image, it is necessary to show the three-dimensional sense and depth on the plane.

Texture painting, sculpture and other plastic arts show the characteristics of various objects in their works through different expression techniques, such as silk, skin, water, stone and other different qualitative characteristics, giving people a sense of reality and beauty. With the help of light and shade, color, lines and other modeling factors, the sense of quantity expresses the feeling of the weight, thickness, size and quantity of an object.

Such as the solemnity of rocks and the lightness of wind and smoke. All realistic objects in painting are required to convey their unique weight and realism.

Using the comparative relationship of quantity, we can produce diverse and unified effects. In painting, according to the principles of geometric perspective and air perspective, the sense of space describes the relationship between objects such as distance, level and interpenetration, thus conveying a profound three-dimensional sense in plane painting.

Terms of volume painting. Refers to the visual objects displayed on the painting plane can give people a three-dimensional sense of occupying three-dimensional space.

In painting, any visible object is determined by the structure of the object itself, which is composed of blocks in different directions and angles. Therefore, it is necessary to grasp the structural characteristics of the object to be painted and analyze its proper relationship in painting in order to achieve a sense of volume.

Theoretical terms of perspective painting. The word "perspective" comes from the Latin word "perspclre".

At first, perspective is to look at the scenery through a transparent plane, and accurately draw the scenery on this plane, that is, to form a perspective view of the scenery. Later, according to certain principles, the science of expressing the spatial position, outline and projection of an object with lines is called perspective.

There are three perspectives: 1 color perspective, 2 vanishing perspective and 3-line perspective. This is summed up by Leonardo da Vinci, and the most commonly used is line perspective. Perspective occupies a large proportion in painting. Its basic principle is to imagine a piece of glass between the painter and the object to be painted, fix the position of the eyes (see with one eye), and connect the key points of the object with the eyes to form a line of sight. Reconnect with the imaginary glass. The position of each point on the glass is the position of the three-dimensional object you want to draw on the two-dimensional plane. This is the application method of perspective in western classical painting. For example, the perspective application of Chinese painting: (1) Multi-viewpoint Chinese painting is good at expressing rich plots, while western painting pays attention to single viewpoint (similar to photography). The rich plot emphasized by Chinese painting can't be completed from a single viewpoint. Therefore, Chinese painting is represented by multiple viewpoints (similar to splitting and recombining multiple lenses of a camera). For example, (2) the height of the camera is represented by a slightly oblique perspective, and mountains with high mountains are often drawn in the distance, which are connected by clouds. Show a feeling that people are higher than mountains. Chinese painting does not use close-ups to represent mountains. (2) Long-distance Chinese painting emphasizes "fighting for a tree and taking an inch of beans." A painter must express himself with telephoto. Picasso's works break the basic law of perspective and show the front and back of an object in two-dimensional space. To understand Picasso's paintings, we must first abandon perspective. Nowadays, painters have begun to ignore all the rules and try to break them. But these practices are in a basic philosophical rule-breaking old rules and creating new ones. The basic term for viewing the horizon and seeing the center point: that is, the painter's eyes are facing a point on the horizontal line of his eyes.

Viewpoint: It is the position of the painter's eyes. Line connecting the viewpoint and the center, at right angles to the horizon.

Vanishing point: an angular object, not parallel to the picture, reaches the vanishing point on both sides of the center of the apparent horizon in perspective. Celestial point: it is an inclined object (in front of the roof of the house) and disappears above the obvious horizon.

Location: It is an inclined object (behind the roof) near high and far low, disappearing below the obvious horizon.

3. Basic knowledge of painting

Color problem:

1 Know the three primary colors, namely red, yellow and blue.

Know the difference between cool color and warm color.

Know better color matching and know what complementary colors are, namely red, green, blue, orange and purple.

Modeling questions:

1 Learn basic sketch, which is very important for drawing!

2 understand and draw a sense of space, so that the object level can be opened.

3 Understand the perspective relationship, that is, near the big and far from the small, near the real and far from the virtual, near the high and far from the low, two straight lines extend indefinitely and finally disappear at one point.

Learn to focus on describing local things.

5 Relationship between black, white and gray of objects

Actually, I still have to watch and learn more. I'm just telling you that I have many years of painting experience and need to paint more.

4. What are the basic common sense of flower arrangement?

The following is some information I found for you from the Internet:

The basis of flower arrangement:

Chinese-style

1. Vertical

The first main branch is inserted vertically into the container, showing a vigorous and upright or graceful posture, giving people a dignified and steady artistic beauty. It is advisable to look up and wait.

2. Inclined type

Insert the main flower branches obliquely outward into the container, and use some branches that naturally bend or grow obliquely to express their lively and dynamic beauty. It is advisable to look up and wait. The overall outline should be an inclined rectangle, that is, the horizontal dimension is greater than the height, in order to show the inclined aesthetic feeling.

3. Flat type

The expansion type is to extend the main flower branches horizontally or horizontally in the container, paying attention to the aesthetic feeling of horizontal lines or ribbons. The first main branch inclines about 80o-90o, and basically forms a horizontal shape with the floral organ.

4 drooping type

The main flower branches are hung and inserted into the container, and the plants with tendrils, semi-tendrils and flexible flower branches show the beauty of slender lines, elegance and fluency, vivid pictures and strong decoration.

5. Integration of floral patterns (landscape layout)

Merging patterns is to combine two identical or different patterns into a whole to form a whole modeling work.

6. Landscape flower arrangement

Landscape flower arrangement is a form of flower arrangement that expresses natural scenery between squares in a basin.

Western style

Symmetric mode

Triangular, fan-shaped, inverted T-shaped, hemispherical, horizontal,

Cone, etc

Asymmetric mode

L-shaped, equilateral triangle, meniscus, S-shaped, etc.

Triangle is one of the basic forms of western flower arrangement. The outline of the pattern is a symmetrical equilateral triangle or isosceles triangle, with the widest lower part and narrow upper part, which looks like a pyramid. The triangular structure is balanced and beautiful, giving people a neat and solemn feeling. Suitable for the decoration of meeting places, halls and churches, and placed on corner coffee tables or corner furniture. Vases with shallow pots or large angstroms are often used as containers.

The fan is radial, and the flowers extend radially from the center in all directions, just like an open fan. Used in ceremonial activities such as welcoming ceremonies, it sets off a lively and festive atmosphere and is highly decorative.

The inverted T-shape is a one-sided symmetrical pattern, shaped like the reverse of the English letter T. When inserting, the vertical line must be kept vertical, and the horizontal lines on the left and right sides are horizontal or slightly drooping. The length of the left and right horizontal lines is generally 2/3 of the length of the middle vertical line. Hair insertion is similar to triangle, but the waist is thinner, that is, the flowers on both sides are concentrated near the focus, and the flowers on both sides generally do not exceed the height of the focus. The inverted T-shape highlights the linear composition, and it is appropriate to use flowers with strong line sense.

Hemisphere type

This is a four-sided symmetrical composition. The outline of flower arrangement is hemispherical, and the length of flower materials used should be basically the same. The overall outline of flower arrangement should be smooth, without obvious concave and convex parts. Hemispherical flower arrangement has a larger flower head and a less prominent floral organ. This kind of flower arrangement is soft and romantic, relaxed and comfortable, and is often used for the decoration of coffee tables and dining tables.

Cone is a symmetrical flower pattern, which can be viewed from all directions. Shaped like a pagoda, it is steady and solemn. From all angles, it is triangular in side view and circular in top view. Its interpolation method is between triangle and hemisphere.

L This is an asymmetrical flower pattern, which is suitable for window sill or corner. It is basically similar to the inverted T-shape, but its left and right sides are not equal in length. One side is the long axis, and the other side is the short axis, emphasizing that the vertical and horizontal lines extend outward.

The equilateral triangle is an asymmetrical and balanced flower pattern with dynamic beauty. It is the most commonly used flower pattern in artistic flower arrangement.

5. Common sense about comics

You can draw on A4 ordinary copy paper when practicing.

If you want to submit a manuscript after mastering it, you have to draw it with special comic paper.

Special cartoon paper has ruler lines, which is convenient for the author, but it is also expensive. It is recommended to use it after proficiency, otherwise it will be wasted.

It's great to practice on A4 paper.

The basic elements of comics are as follows:

1. Script (story

2. Split mirror.

3. Comedy language

Only by doing these three things can we go further.

1. After editing, the manuscript is developed with various ideas and recorded as the theme, and then the painter Jia paints on comic paper or colored paper.

2. Draw the characters and their dialogues roughly with a pencil.

3. On the basis of pencil lines, add with a black pen, carefully sketch clothes and so on.

4. Add background and hair. Draw all black parts of the background, etc. Where it is painted out (beyond the predetermined area), it is modified with white poster color.

5. According to the fixed specifications of transparent drawing paper, cut out various patterns with a knife.

6. Fill (the manuscript) with white poster color, etc. That's it.

7. Plant words on the manuscript through photo typesetting, and then print after imposition.

8. After printing, the printing factory will bind the printed pages into a book with a cover.

Long cartoons are made by repeating the above steps over and over again in the case of new scripts. You don't have to think and draw at the same time. You must decide the plot at step 1. It's also called a script.

Story is the basis of comics, shot is the expression of story, and comic language is the clever connection between story and shot.

In addition to the traditional hand-drawing, you can also draw cartoons directly on the computer with a hand-drawing board, and then make various effect networks. I won't explain the steps one by one.

In fact, the most important thing in painting is imagination and patience.

The most important foundation of comics is based on: sketch.

Mind: take a small sketch book with you in your life, often sketch the details of your life and find some interesting things. Draw it and exercise your lack of experience and imagination in the process of drawing cartoons.

Very helpful ~ ~ ~

Study hard and wish you success in doing what you like.

6. What should be the most important thing in illustration learning?

Learning some software technology and CG operation technology really doesn't need any foundation, but in the illustration industry, you can only do some technical work, not creative work.

If you have a good foundation and practice hard, you can do more creative illustration work.

In fact, you have two choices, either you don't practice the basics, learn some CG knowledge, and engage in some related technical work of illustration in the future, and you can survive. Either practice the foundation well. Of course, the foundation cannot be built overnight. You can still choose to engage in some technical work of illustration first, and at the same time hone your basic skills of creation, and then embark on the road of creation in a year or two. It is a process of hard practice from no foundation to foundation. The foundation we are talking about is not to let you draw plaster still life from scratch, but the foundation needed for illustration creation. When the boss is not young, it is a waste of his life, time and money to draw still life from scratch. The basic course of Illustrator Digital Art Center is to refine the basic knowledge needed for illustration creation and remove the useless parts. Courses include composition, structure, modeling, dynamic design, perspective and other knowledge. Training you in a unique way can improve your basic ability in a short time.

The foundation I'm talking about is not to let you draw a plaster still life from scratch, but the foundation needed for illustration creation. When the boss is not young, it is a waste of his life, time and money to draw still life from scratch. The basic course of Illustrator Digital Art Center is to refine the basic knowledge needed for illustration creation and remove the useless parts. Courses include composition, structure, modeling, dynamic design, perspective and other knowledge. Training you in a unique way can improve your basic ability in a short time. -Illustrator Digital Art Center.

7. What basic knowledge do you need to draw cartoons?

There are books on the market that teach children elementary comics.

You can look for it.

And then `````````````````````` really went too far ~ ~ ~.

I don't know.

Tools: special pen tip and pen container (pen tip: D student pen G round pen, pen container and round pen container), special cartoon manuscript paper (B4, etc.). ), fast-drying black ink that is not easy to melt, fast-drying whitening liquid that is not easy to fall off, small brush for blackening and whitening, pencil, eraser, light blue pencil (can't copy, used to modify typed manuscript).

````````````` There are too many ``````````` buy your own books.

I taught myself, too.

On the market: You Sulan and Qiao Ying's Comic Academy.

Beichuan mian cartoon college

` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` ` `

Come on! Learn more comics, imitate more, and then further determine your own painting style, strengthen the effect and quality!

Be patient! Perseverance!

It's not easy to learn comics ~ ~ ~

8. Art tips

Art usually refers to painting, sculpture, arts and crafts, architectural art, etc. They are carried out in space, expressed and appealed to human vision.

When this name was first used in Europe in the 17th century, it generally referred to painting, sculpture, literature, music and other things with aesthetic significance. When I began to use this word in general around the May 4th Movement, it also had the meaning equivalent to the whole art. ..

For example, when Lu Xun explained the word "art" in 19 13, he wrote: "Art is a word translated from English love. People who love clouds are originally from Greece, and their friendship is art.

Soon after, China translated the word "love" with the word "art", and the word "art" became the name specifically referring to visual arts such as painting. Modeling expression means: the skills and means to create artistic images in plastic arts.

Such as painting with the help of color, light and shade, lines, anatomy and perspective; Sculpture depends on volume and structure. These techniques and means, through long-term artistic practice, have formed the unique and special artistic language of these plastic arts, which determines the different expression rules of these arts and is related to the success or failure of the plastic arts image and the appeal of artistic works.

The artist's constant exploration and improvement of the regularity of modeling expression means is a necessary condition for artistic creation to express new life content and meet people's developing aesthetic hobbies. The golden section is also called Huang Jinlv and the golden ratio.

On a line segment, the line segment is divided into long segments and short segments according to the optimal length-width ratio, or the optimal ratio of long sides to short sides of a rectangle is formed according to the optimal length-width ratio, that is, the golden section. Terms of two-dimensional painting.

Refers to the plane space composed of length (left and right) and height (up and down). In painting, in order to truly reproduce the image, we often use perspective, shading and other modeling methods to create the profound feeling and three-dimensional effect of the image on the plane of the second space, that is, to create the illusion of the three-dimensional space of natural objects with the second space.

Some paintings, such as decorative paintings and pattern paintings, do not require strong depth effect, but deliberately pursue the plane meaning of the second space in order to obtain artistic expression. Stereographic terminology.

Refers to the three-dimensional space composed of length (left and right), height (up and down) and depth (depth). In painting, in order to truly reproduce the image, it is necessary to show the three-dimensional sense and depth on the plane.

Texture painting, sculpture and other plastic arts show the characteristics of various objects in their works through different expression techniques, such as silk, skin, water, stone and other different qualitative characteristics, giving people a sense of reality and beauty. With the help of light and shade, color, lines and other modeling factors, the sense of quantity expresses the feeling of the weight, thickness, size and quantity of an object.

Such as the solemnity of rocks and the lightness of wind and smoke. All realistic objects in painting are required to convey their unique weight and realism.

Using the comparative relationship of quantity, we can produce diverse and unified effects. In painting, according to the principles of geometric perspective and air perspective, the sense of space describes the relationship between objects such as distance, level and interpenetration, thus conveying a profound three-dimensional sense in plane painting.

Terms of volume painting. Refers to the visual objects displayed on the painting plane can give people a three-dimensional sense of occupying three-dimensional space.

In painting, any visible object is determined by the structure of the object itself, which is composed of blocks in different directions and angles. Therefore, it is necessary to grasp the structural characteristics of the object to be painted and analyze its proper relationship in painting in order to achieve a sense of volume.

Theoretical terms of perspective painting. The word "perspective" comes from the Latin word "perspclre".

At first, perspective is to look at the scenery through a transparent plane, and accurately draw the scenery on this plane, that is, to form a perspective view of the scenery. Later, according to certain principles, the science of expressing the spatial position, outline and projection of an object with lines is called perspective.

Terms of light and dark painting. Refers to the brightness change of light, backlight and reflective parts of objects in painting and the expression method of this change.

An object has three bright and dark states under illumination, which are called three major surfaces, namely, bright surface, middle surface and dark surface. The light and color of the three major surfaces are generally dark in the middle.

The light and shade of the three major surfaces are generally manifested in five basic levels, namely, five tones: ① the bright surface is always illuminated; (2) Gray surface-middle surface, half bright and half dark; (3) the dividing line between the bright part and the dark part; (4) a backlight part on the dark side; ⑤ Reflect the dark and bright parts of a single surface affected by ambient reflection. It has always been the basic method of square painting to describe objects according to the level of light and shade.

During the Renaissance, vasari once said in "Biography of Artists": "When painting, after drawing the outline, use shades to roughly distinguish the light and shade, and then carefully display the light and shade in a single room, so does the bright part." Rembrandt is a master of shadow techniques among European painters.

Terms of contour plastic arts. Refers to the edge line that defines the range of performance objects.

In painting and sculpture, whether the outline is correct is regarded as the key to the success or failure of the work. Terminology of composition and plastic arts.

Refers to the structural configuration method of artistic images in works. It is an important means for plastic arts to express the ideological content of works and gain artistic appeal.

One of the important factors of color painting. It is a complex phenomenon that various objects absorb and reflect light to varying degrees and act on people's audience.

Due to the different textures of objects, the absorption and reflection of various colors of light are different, so everything in the world has formed ever-changing colors. The qualitative appearance that tonal colors can present.

Different colors in nature are infinitely rich, such as purplish red, silver gray and orange yellow. Chromaticity refers to the inherent lightness of the color itself.

For example, among the seven basic colors, purple * * * is the darkest and yellow * * * is the brightest. Tone is also called tone.

Under the irradiation of light source color with certain hue and lightness, the surface of the object is shrouded in a unified color tendency and color atmosphere, which is hue. Colors have no attributes.

Colors are basically divided into warm colors (also called hot colors) and cool colors (also called cool colors). Red, orange and yellow are warm colors, giving people a warm, warm and outgoing feeling.

How to do illustration well? Illustration, also known as illustration, is an illustration drawn by hand-drawing, mouse drawing and computer drawing. Film and television animation game industry is called CG illustration because of its wide use and different styles, which is widely used in design industry and film and television animation game industry.

Illustrations use pictures to express vividness, life and appeal. The main difference from graphic design can be simply understood as "illustration highlights the story rather than attracting attention". Illustration is also an artistic form of visual expression, which mainly includes photography/painting/three-dimensional illustration. Illustration has a special position in the art field and is closely related to the publishing industry. Both e-books and physical books are needed, and there are also employment opportunities in other fields, such as music/movies/media.

Extended data:

Common tools for illustration:

1. Hand-painted illustrations are drawn with paper and pen-common tools: marker, colored lead and watercolor.

2, mouse illustration-common tools: PS, AI, etc.

3, board drawing illustration-common equipment: hand-drawn board, digital screen, ipad, mobile phone.

4. the hand-drawn board needs to be connected to a computer to draw pictures in PS, AI and SAI. Digital screens and ipad can draw directly without connecting a computer. The mobile phone needs to be painted by capacitance pen.

The basic standard of learning illustration is whether there is an audition class or not.

There are indeed many places to learn illustration now, and it is really a mixture of good and evil people, which makes many students spend their eyes. How should they choose? There is a good saying, to judge how a learning place is, at least we should first look at each other's strength, and the audition class is to look at each other's best strength, but also at the quality of the course. If even the audition class is not good, then other classes are even more useless. And choose to learn this piece, choose a big school, and have security.

If you don't know where to find it, you can go to the online class I took before. That's where I study. Every night at 8: 00, there will be a free online course of illustration and board painting by the master painter. The teacher's speech is easy to understand, humorous and witty, and can explain the painting skills that plague everyone simply and thoroughly. Watching a teacher's video is much better than reading a book. A class can solve many problems for you and understand the development of the whole industry. It's free anyway. You can listen to it. Giving lectures at night will not delay your work or study during the day. Students who want to listen can enter Weixin (homophonic):

The first group in front is: gon _ WEN-WEN-BANG-BANG:699 _ Just combine the above two groups of numbers in order. Remarks: Illustration.

Since students like to learn board drawing illustrations, it is irresponsible to try and give themselves a chance. Only by trying can they know if they are the right material, instead of always wandering in their inner world and wasting their talents.

The earliest illustrations in China appeared in the form of printmaking. With the introduction of Buddhist culture, they used "disguised" illustrations in the scriptures to publicize their teachings. At present, China's earliest prints are recorded in historical materials, namely "Dalagni Curse" published by Tang Suzong. The title page painting of King Kong Prajna Sutra published by Tang Yizong Xian Tong in the 9th year (868) is the exact date.

In the Song, Jin and Yuan Dynasties, book illustrations developed greatly. The application scope has expanded to medical books, historical geography books, archaeological catalogue books, daily encyclopedia books and other books, and color overprint illustrations have appeared. During the Ming and Qing Dynasties, it can be said that the ancient illustration art developed greatly, and there were book engraving industries all over the country. Different regions have formed different styles.