What are the steps for a fresh install of win10 on a USB flash drive

How to use a USB flash drive to install Win10? Now most of the new computers are pre-installed win10 system, more and more users also choose to use the win10 system, some users bought a new computer, intend to install win10 through the U disk brand new, but do not know what the specific installation steps. As win10 supports UEFI boot, this side of the editorial uefi new installation as an example, teach you to use the U disk boot new installation of win10 professional system method.

Installation Notes:

1, if the computer does not have a system, you need to make a USB flash drive with the help of another available computer

2, this article introduces uefipe install ghostwin10 method, reinstallation of the C disk and desktop before the need to back up the important files, you need to win1064 bit >

How to use wepe to install win10 system (uefi installation, support greater than 4G image)

A, installation preparation

1, uefi computer, 8G capacity USB flash drive

2, win10 system download: ghostwin1064-bit Extreme Flagship Edition V2017.12

3, cabbage peuefi version: uefi boot u disk production method

Two, boot settings

Computer set up UEFI startup method

U disk installation system startup hotkey Daquan

If your BIOS has these options please Set the following, usually pre-installed win10 models do not need to set:

SecureBoot set to Disabled to disable the boot security check, this is the most important

OSOptimized set to Others or Disabled system type settings

CSM ( CompatibilitySupportModule)Support is set to Yes or Enabled

UEFI/LegacyBoot Options is selected as Both

UEFI/LegacyBootPriority is selected as UEFIFirst

< computer startup key is different, in the pop-up startup item selection box, select the recognized U disk options, if there is a startup item with UEFI, to select the uefi item, enter from uefi boot;

3, due to the production of different ways, some of the Chinese cabbage uefipe startup disk will go directly into the pe system, some will first show this main interface, if it is the first to display this interface, press the ↓ arrow key to select 02 Enter to run win8PEx64;

4, into the cabbage pe system, if previously pre-installed win10, that is, uefi boot, direct execution of step 7, if it is a new hard disk, double-click on the desktop of the DG partition tool, right-click to select the hard disk, click on the fast partition;

5, the partition table type select GUID, that is, GPT, and then set the partition table type. That is, GPT, and then set the number of partitions, set the size of the system disk, it is recommended that more than 50G, SSDs also need to check the alignment partition to this sector, sector default 2048 can be, OK;

6, after the implementation of the hard disk partitioning as well as the formatting process, the partition as shown in the figure after the partition, the gpt partition table will be ESP, MSR two additional partitions;

7, Then double-click to open the cabbage PE one-key installation, GHOWIMISO image path to select win10x64iso file, and then click the drop-down box, the tool will automatically extract the win10.gho file, select the win10.gho file;

8, then select the restore partition, select the location of the win10 system installation, usually the C disk, pe under the disk symbol! may be displayed incorrectly, if not C disk, according to the volume system or hard disk size to choose, click OK;

9, this dialog box pops up, check the completion of the reboot, boot repair of these options, click Yes to perform the next operation;

10, to this interface, the implementation of the process of installing the Win10 system to the C disk, wait for the progress bar to complete the implementation, generally 2-5 minutes or so;

11, after the operation is completed, the computer will be prompted to restart, the default is 10 seconds after the automatic restart, or click is to restart the computer immediately;

12, at this time, pull out the USB flash drive, it will automatically enter this interface, continue to execute the win10 system components installation, driver installation and system configuration process;

13, the entire installation process takes 5-10 minutes, after booting into the win10 system installation process, the system will take more than 10 minutes to install, the installation process will take more than 10 minutes. The whole installation process takes 5-10 minutes, and after booting into the Win10 desktop, the process of installing Win10 system on the USB flash drive ends.

These are the steps for installing Win10 on a USB flash drive, and this is the uefi installation method introduced here, if you need to install Win10 on your computer, you can follow the steps above.